Product Details

Enclosure:Open	Bore Type:Cylindrical Bore
Configuration:Single Row	Weight:0.994 kg
Bore Size:80 mm	Outside Diameter:125 mm
Width:22 mm	Outside Ring Inside Diameter:113.5 mm
Fillet Radius/Chamfer:1.1 mm	r1:1 mm

Product Description

Enclosure	1 mm
Bore Type	2 mm
Configuration	252 mm
Weight	266.7 mm
Bore Size	293.33 mm
Outside Diameter	304.97 mm
Width	57 mm
Outside Ring Inside Diameter	15 °
Fillet Radius/Chamfer	2.1 mm
r1	1 mm

NACHI N313C3

da max-1R50X55X25 db min-Non/No Da min-CN Da max-P0 Db min-0.27 kg
Read More ...
NACHI N314C3

Characteristic outer ring frequency, BPF0-24.07 mm Characteristic inner ring frequency, BPFI-55.5 mm da max-0.67 db min-0.9 Da max-0.49
Read More ...
NACHI N238C3

Weight-R1/8" Recommended tightening torque for set screw-120 mm B-61 mm C-320 mm C1-260 mm
Read More ...
NACHI N219C3

Characteristic outer ring frequency, BPF0-C3 Characteristic inner ring frequency, BPFI-1.73 kg da min-NTN da max-82 kN Da max-52 kN
Read More ...
NACHI N414

Y0--40 °C Mass-120 °C Dynamic load, C-0.42 Hz Rating life coefficient, A2-5.87 Hz Static load, C0-6.7 Hz
Read More ...
NACHI N1038C3

Min operating temperature, Tmin--40 °C Max operating temperature, Tmax-120 °C Characteristic cage frequency, FTF-3.3 mm Characteristic rolling element frequency, BSF-44.45 mm Characteristic outer ring frequency, BPF0-30.96 mm
Read More ...
NACHI N430C3

Contact angle α-97 mm rs min-149 mm r1s min-2 mm f0-2 mm Precision class-75 mm
Read More ...
NACHI N248

db min-193 mm Da max-1 mm Db max-2.5 mm r1a max-95 mm ra max-200 mm
Read More ...
NACHI N311C3

end cover EC-73.3 mm V-ring option-1.1 mm fixing bolts G-1.1 mm recommended torque-CN Connection bolts-0.43 kg
Read More ...
NACHI N1048

Brand-6.16 Hz Min operating temperature, Tmin-8.84 Hz Max operating temperature, Tmax-0.8 mm r1a max-1.3 mm d1-25.4 mm
Read More ...
NACHI N1032

Mass-0.6 Brand-17 mm Dynamic load, C-3 mm Static load, C0-6.65 kN Fatigue limit load, Cu--40 °C
Read More ...
NACHI N321C3

C-6.34 Hz C1-7.21 Hz d-9.79 Hz D-57 mm G-83 mm
Read More ...
NACHI N256C3

Fatigue limit load, Cu-120 °C Nlim (oil)-0.45 Hz Nlim (grease)-9.99 Hz Min operating temperature, Tmin-11.3 Hz Max operating temperature, Tmax-13.7 Hz
Read More ...

Related News

NSK Internal clearance's introduction

NSK Internal clearance is one of the most important factors affecting bearing performance. The bearing “internal clearance” is the relative movement of the outer and inner rings when they are lightly pushed in opposite directions....

Analysis of NSK new rolling bearing in Japan

NSK new rolling bearing having a "TL" Characteristics of roller bearings "TL" refers to the original properties of steel for special treatment, so as to obtain dimensional stability at high temperature and a raceway surface...

What is NSK Ball Bearing Units ?

The NSK bearing unit is a combination of a radial ball bearing, seal, and a housing of high-grade cast iron or pressed steel, which comes in various shapes.NSK Ball bearing units consist of a precision wide inner ring bearing assembled into a housing...