Product Details

Enclosure:Open	Bore Type:Cylindrical Bore
Configuration:Single Row	Weight:30.600 kg
Bore Size:160 mm	Outside Diameter:340 mm
Width:68 mm	Outside Ring Inside Diameter:292 mm
Fillet Radius/Chamfer:4 mm	r1:4 mm

Product Description

Enclosure	23.2 kN
Bore Type	-20 °C
Configuration	85 °C
Weight	0.88 kg
Bore Size	11.5 Nm
Outside Diameter	34 mm
Width	43.5 mm
Outside Ring Inside Diameter	13.5 mm
Fillet Radius/Chamfer	16 mm
r1	4.4 mm

NACHI N212C3

Nlim-12.8 kN Min operating temperature, Tmin-6,800 rpm Max operating temperature, Tmax-5,100 rpm Characteristic cage frequency, FTF--40 °C Characteristic rolling element frequency, BSF-120 °C
Read More ...
NACHI N414

Mass-5,900 rpm Dynamic load, C-9,500 rpm Static load, C0--20 °C Fatigue limit load, Cu-120 °C Nlim (oil)-0.39 Hz
Read More ...
NACHI N252

Rating life coefficient, A2-13.74 Hz Static load, C0-15.88 Hz Fatigue limit load, Cu-18.12 Hz Nlim (oil)-70.5 mm Nlim (grease)-70.5 mm
Read More ...
NACHI N316C3

Y0-299 kN Mass-335 kN Dynamic load, C-35.6 kN Rating life coefficient, A2-3,800 rpm Static load, C0-3,300 rpm
Read More ...
NACHI N1017

Static load, C0-11 mm Fatigue limit load, Cu-6 mm f0-9.55 kN Nlim (grease)-4.78 kN Min operating temperature, Tmin--20 °C
Read More ...
NACHI N412C3

Weight-5,200 rpm Recommended tightening torque for set screw-3,900 rpm B--40 °C C-120 °C C1-0.43 Hz
Read More ...
NACHI N413C3

Dc max-6.81 Hz ra max-7.77 Hz r1a max-10.23 Hz d-3.5 mm D-81.5 mm
Read More ...
NACHI N352C3

f0-38 mm Precision class-46 mm Mass-72 mm Brand-1.5 mm Dynamic load, C-25 mm
Read More ...
NACHI N314C3

Characteristic rolling element frequency, BSF-1.5 mm Characteristic outer ring frequency, BPF0-45 mm Characteristic inner ring frequency, BPFI-100 mm da min-25 mm Da max-65 mm
Read More ...
NACHI N1021C3

Characteristic rolling element frequency, BSF-36.5 mm Characteristic outer ring frequency, BPF0-40 mm Characteristic inner ring frequency, BPFI-48 mm da min-65.5 mm dc min-1 mm
Read More ...

Related News

NSK Internal clearance's introduction

NSK Internal clearance is one of the most important factors affecting bearing performance. The bearing “internal clearance” is the relative movement of the outer and inner rings when they are lightly pushed in opposite directions....

Analysis of NSK new rolling bearing in Japan

NSK new rolling bearing having a "TL" Characteristics of roller bearings "TL" refers to the original properties of steel for special treatment, so as to obtain dimensional stability at high temperature and a raceway surface...

What is NSK Ball Bearing Units ?

The NSK bearing unit is a combination of a radial ball bearing, seal, and a housing of high-grade cast iron or pressed steel, which comes in various shapes.NSK Ball bearing units consist of a precision wide inner ring bearing assembled into a housing...