Tapered Roller Bearing H-E30204J

Cr-8.78 Hz C0r-3.5 mm Nlim (grease)-73.4 mm Nlim (oil)-22.02 mm Min operating temperature, Tmin-0.29

Characteristic inner ring frequency, BPFI-1.4 da min-1,070 kN Da max-108 kN ra max-1,900 rpm d-1,400 rpm

D2-0.16 kg a-3.7 Nm Contact angle α-27 mm rs min-15 mm r1s min-4.3 mm

Y0-7.2 Hz Mass-9.8 Hz Dynamic load, C-0.8 mm Rating life coefficient, A2-1.3 mm Static load, C0-26.99 mm

Nlim (grease)-0.42 Hz Min operating temperature, Tmin-5.62 Hz Max operating temperature, Tmax-6.22 Hz Characteristic cage frequency, FTF-8.78 Hz Characteristic rolling element frequency, BSF-47 mm

B--40 °C B1-120 °C B2-0.42 Hz C-5.63 Hz C1-6.78 Hz

e-4 mm Y2-17 mm Y0-4 mm Mass-500 mm Brand-1.5 mm

Dynamic load, C-CN Static load, C0-0.3 kg Fatigue limit load, Cu-NTN Nref-32 kN Nlim-36 kN

Characteristic outer ring frequency, BPF0--40 °C Characteristic inner ring frequency, BPFI-120 °C ra max-0.44 Hz r1a max-8.5 Hz D-9.77 Hz

Characteristic inner ring frequency, BPFI-17.5 mm ra max-20 mm r1a max-5.8 mm d-34.92 mm B-51.1 mm

ra max-0.43 Hz d-7.37 Hz D-6.93 Hz B-9.07 Hz d1-163 mm

T-133.8 mm d1-101.8 mm a-108.2 mm e-2 mm Y2-2 mm

Nref-5.42 Hz Nlim-7.58 Hz Min operating temperature, Tmin-46.5 mm Max operating temperature, Tmax-73.5 mm Characteristic cage frequency, FTF-71 mm

Min operating temperature, Tmin-9.79 Hz Max operating temperature, Tmax-78 mm da min-82 mm da max-92 mm db min-117 mm

S-12,000 rpm SW--25 °C C0-110 °C T min.-0.46 Hz T max.-13.07 Hz

Characteristic rolling element frequency, BSF-5.62 Hz Characteristic outer ring frequency, BPF0-7.06 Hz Characteristic inner ring frequency, BPFI-9.94 Hz da min-210 mm Da max-206 mm

Max operating temperature, Tmax-7,800 rpm Characteristic cage frequency, FTF-14,000 rpm Characteristic rolling element frequency, BSF--40 °C Characteristic outer ring frequency, BPF0-120 °C Characteristic inner ring frequency, BPFI-0.43 Hz

Cb min-7 mm ra max-3.5 mm r1a max-0.36 rs min-1.87 r1s min-2.79

C0--20 °C T min.-120 °C T max.-0.44 Hz Weight-7.88 Hz Recommended tightening torque for set screw-7 Hz

Characteristic cage frequency, FTF-0.42 Hz Characteristic rolling element frequency, BSF-4.92 Hz Characteristic outer ring frequency, BPF0-5.94 Hz Characteristic inner ring frequency, BPFI-8.06 Hz ra max-47 mm