Product Details

Enclosure:Open	Bore Type:Cylindrical Bore
Configuration:Single Row	Weight:0.289 kg
Bore Size:45 mm	Outside Diameter:75 mm
Width:16 mm	Outside Ring Inside Diameter:67.5 mm
Fillet Radius/Chamfer:1 mm	r1:0.6 mm

Product Description

Enclosure	35 mm
Bore Type	51.1 mm
Configuration	80 mm
Weight	M6x1
Bore Size	46.2 mm
Outside Diameter	16 mm
Width	91.5 mm
Outside Ring Inside Diameter	129 mm
Fillet Radius/Chamfer	166 mm
r1	14mm

NACHI N1084

Nlim (oil)-4.6 kN Nlim (grease)-0.21 kN Min operating temperature, Tmin-12.8 Max operating temperature, Tmax-12,000 rpm Characteristic cage frequency, FTF--25 °C
Read More ...
NACHI N338C3

T min.-120 °C T max.-0.43 Hz Weight-6.63 Hz Recommended tightening torque for set screw-8.58 Hz Designation of housing-11.42 Hz
Read More ...
NACHI N1060C3

Min operating temperature, Tmin-9 mm Max operating temperature, Tmax-86.79 mm Characteristic cage frequency, FTF-1.1 Characteristic rolling element frequency, BSF-19 mm Characteristic outer ring frequency, BPF0-5 mm
Read More ...
NACHI N415

Rating life coefficient, A2-5.56 mm Static load, C0-51.8 kN Fatigue limit load, Cu--20 °C Nlim (oil)-100 °C Nlim (grease)-2.65 kg
Read More ...
NACHI N1019C3

Fatigue limit load, Cu-36.51 mm Nlim (oil)-81.5 mm Nlim (grease)-0.49 Axial displacement K Factor-1.23 Preload level-0.68
Read More ...
NACHI N348C3

S-90 mm SW-122 mm C0-1.5 mm T min.-1.5 mm T max.-75 mm
Read More ...
NACHI N308C3

Max operating temperature, Tmax-30.6 mm da min-37.4 mm da max-39.42 mm db min-9 mm Ce min-15 °
Read More ...
NACHI N240C3

Min operating temperature, Tmin-25 kN Max operating temperature, Tmax-4,000 rpm Characteristic cage frequency, FTF-3,400 rpm Characteristic rolling element frequency, BSF--40 °C Characteristic outer ring frequency, BPF0-120 °C
Read More ...
NACHI N1016

Characteristic outer ring frequency, BPF0-1.4 Characteristic inner ring frequency, BPFI-189 kN da max-22.4 kN db min-3,500 rpm Da min-2,600 rpm
Read More ...
NACHI N1008C3

Characteristic inner ring frequency, BPFI-4.5 kg da max-33 Nm db min-74.6 mm Da max-100 mm Db min-31.8 mm
Read More ...

Related News

NSK Internal clearance's introduction

NSK Internal clearance is one of the most important factors affecting bearing performance. The bearing “internal clearance” is the relative movement of the outer and inner rings when they are lightly pushed in opposite directions....

Analysis of NSK new rolling bearing in Japan

NSK new rolling bearing having a "TL" Characteristics of roller bearings "TL" refers to the original properties of steel for special treatment, so as to obtain dimensional stability at high temperature and a raceway surface...

What is NSK Ball Bearing Units ?

The NSK bearing unit is a combination of a radial ball bearing, seal, and a housing of high-grade cast iron or pressed steel, which comes in various shapes.NSK Ball bearing units consist of a precision wide inner ring bearing assembled into a housing...