Product Details

Category:Angular Contact Ball Bearings	BDI Inventory:10.0
Manufacturer Name:SKF	Minimum Buy Quantity:N/A
Weight / Kilogram:1.17	EAN:7316577089441
Product Group - BDI:B00308	Enclosure:Open
Flush Ground:Yes

Product Description

Category	6.7 Hz
BDI Inventory	7.71 Hz
Manufacturer Name	10.29 Hz
Minimum Buy Quantity	3.5 mm
Weight / Kilogram	3.3 mm
EAN	59.5 mm
Product Group - BDI	16.41 mm
Enclosure	0.32
Flush Ground	1.88

TIMKEN 5309W

r max-3,900 kN D-7,500 kN oil level-515 kN oil quantity-530 rpm housing weight-850 rpm
Read More ...
NSK 5313TNC3

r1a max-13.88 Hz d-294.6 mm D-405.4 mm B-3 mm C-280 mm
Read More ...
SKF 3309 A/C3

Fatigue limit load, Cu-15.8 Hz Nlim (oil)-3.5 mm Nlim (grease)-3.3 mm Min operating temperature, Tmin-161.92 mm Max operating temperature, Tmax-38.1 mm
Read More ...
SKF 3212 A

r1s min-54 mm Radial clearance class-10 mm Mass-242 kN Dynamic load, C--40 °C Static load, C0-100 °C
Read More ...
SKF 3306 A-2RS1/C3

Radial clearance class-86 mm Mass (without HJ ring)-140 mm Brand-271 mm Dynamic load, C-185 mm Static load, C0-201 mm
Read More ...
SKF 7314PJDU

C-110 °C C1-0.38 Hz d-4.03 Hz D-3.06 Hz G-4.94 Hz
Read More ...
SKF 5210M

Characteristic outer ring frequency, BPF0-120 °C Characteristic inner ring frequency, BPFI-0.46 Hz da max-14.01 Hz db min-13.47 Hz Da max-15.53 Hz
Read More ...
NACHI 5306ZZ

r1s min-2,900 rpm Radial clearance class--40 °C Mass (without HJ ring)-120 °C Dynamic load, C-0.45 Hz Static load, C0-9.37 Hz
Read More ...
NACHI 7212BMU C3

C-6.41 Hz C0-7.21 Hz T min.-9.79 Hz T max.-78 mm Weight-92 mm
Read More ...
SKF 5308CZZ

Characteristic inner ring frequency, BPFI-31 mm da min-17 mm da max-3.7 mm Da max-19.05 mm ra max-47 mm
Read More ...
SKF 3203 A-2RS1TN9/C3

Recommended tightening torque for set screw-4,500 rpm Designation of housing-3,300 rpm Designation of bearing--40 °C B-120 °C A-0.44 Hz
Read More ...
TIMKEN 5305K

C0-NTN T min.-430 kN T max.-1,770 kN Weight-400 rpm Recommended tightening torque for set screw-1,600 rpm
Read More ...

Related News

NSK Internal clearance's introduction

NSK Internal clearance is one of the most important factors affecting bearing performance. The bearing “internal clearance” is the relative movement of the outer and inner rings when they are lightly pushed in opposite directions....

Analysis of NSK new rolling bearing in Japan

NSK new rolling bearing having a "TL" Characteristics of roller bearings "TL" refers to the original properties of steel for special treatment, so as to obtain dimensional stability at high temperature and a raceway surface...

What is NSK Ball Bearing Units ?

The NSK bearing unit is a combination of a radial ball bearing, seal, and a housing of high-grade cast iron or pressed steel, which comes in various shapes.NSK Ball bearing units consist of a precision wide inner ring bearing assembled into a housing...