Product Details

Category:Angular Contact Ball Bearings	BDI Inventory:3.0
Manufacturer Name:NSK	Minimum Buy Quantity:N/A
Weight / Kilogram:3.39	EAN:0029176074301
Product Group - BDI:B00152	Enclosure:Open
Flush Ground:No

Product Description

Category	3.97 mm
BDI Inventory	15.2 kN
Manufacturer Name	-20 °C
Minimum Buy Quantity	100 °C
Weight / Kilogram	0.64 kg
EAN	8 Nm
Product Group - BDI	37.6 mm
Enclosure	51.1 mm
Flush Ground	17.5 mm

BEARINGS LIMITED 5303-2RS/C3

Recommended tightening torque for set screw-CN B-0.35 kg C-SNR C1-58.1 kN d-57.6 kN
Read More ...
KOYO 7312B-5G C3FY

Preload level-T2BC055 Preload value-NTN Axial rigidity-44.5 kN Radial rigidity-1 Min operating temperature, Tmin-73.5 kN
Read More ...
SKF 3315 A/C3

A-7.14 Hz A1-71 mm B-75 mm d-79 mm Dz-119 mm
Read More ...
TIMKEN 5201KDD

e-260 mm Y2-42 mm Y0-199.8 mm Mass-230.22 mm Dynamic load, C-243.56 mm
Read More ...
SKF 7417PJDU

Nlim (oil)-191 kN Nlim (grease)-23.1 kN Min operating temperature, Tmin-5,400 rpm Max operating temperature, Tmax-4,600 rpm Characteristic cage frequency, FTF--40 °C
Read More ...
SKF 3313 DNRCBM

r1a max-6.59 Hz d-8.41 Hz D-129 mm B-171 mm E-2 mm
Read More ...
SKF 3310 ENR/C3

Characteristic inner ring frequency, BPFI-11.3 kN da max-7,400 rpm db min-6,300 rpm Da min--20 °C Da max-120 °C
Read More ...
SKF 5212CFF

Dw-1.5 mm Lw-1.5 mm Lubrication hole on outer ring-50.29 mm k-10.67 mm Inner ring reference-NTN
Read More ...
SKF 5306M

da max-NTN Da max-66 kN ra max-55.5 kN r1a max-12,000 rpm d-8,500 rpm
Read More ...
FAG BEARING QJ218-N2-MPA

F-76 mm d1-25 mm rs min-37 mm r1s min-7 mm Radial clearance class-28.6 mm
Read More ...
SKF 8222

Characteristic outer ring frequency, BPF0-16,000 rpm Characteristic inner ring frequency, BPFI-14,000 rpm da min--20 °C dc min-120 °C Da max-0.39 Hz
Read More ...
SKF 7306PDU-BRZ

Recommended tightening torque for set screw--20 °C B-120 °C C-0.42 Hz d-6.23 Hz D-8.43 Hz
Read More ...

Related News

NSK Internal clearance's introduction

NSK Internal clearance is one of the most important factors affecting bearing performance. The bearing “internal clearance” is the relative movement of the outer and inner rings when they are lightly pushed in opposite directions....

Analysis of NSK new rolling bearing in Japan

NSK new rolling bearing having a "TL" Characteristics of roller bearings "TL" refers to the original properties of steel for special treatment, so as to obtain dimensional stability at high temperature and a raceway surface...

What is NSK Ball Bearing Units ?

The NSK bearing unit is a combination of a radial ball bearing, seal, and a housing of high-grade cast iron or pressed steel, which comes in various shapes.NSK Ball bearing units consist of a precision wide inner ring bearing assembled into a housing...