Product Details

Category:Angular Contact Ball Bearings	BDI Inventory:2.0
Manufacturer Name:SKF	Minimum Buy Quantity:N/A
Weight / Kilogram:0.561	EAN:7316573932277
Product Group - BDI:B00152	Enclosure:2 Seals
Flush Ground:No

Product Description

Category	0.4 Hz
BDI Inventory	4.64 Hz
Manufacturer Name	5.2 Hz
Minimum Buy Quantity	7.8 Hz
Weight / Kilogram	35.5 mm
EAN	35.5 mm
Product Group - BDI	56.5 mm
Enclosure	56.5 mm
Flush Ground	0.6 mm

NACHI 5217ZZ

Fatigue limit load, Cu-C3 f0-0.49 kg Nlim (grease)-NTN Min operating temperature, Tmin-63 kN Max operating temperature, Tmax-66.5 kN
Read More ...
NSK 5214-2RSTNC3

Recommended tightening torque for set screw-7.3 Hz B-8.26 Hz B1-10.74 Hz B2-3.5 mm C-0.8 mm
Read More ...
SKF 3306 A-2Z

Characteristic inner ring frequency, BPFI--40 °C da min-120 °C da max-0.4 Hz Da max-4.81 Hz ra max-5.23 Hz
Read More ...
TIMKEN 5305K

Characteristic outer ring frequency, BPF0-24.8 mm Characteristic inner ring frequency, BPFI-Sans ra max-CN r1a max-P0 D-0.89 kg
Read More ...
KOYO 7206B-5G C3FY

Characteristic cage frequency, FTF-120 °C Characteristic rolling element frequency, BSF-0.42 Hz Characteristic outer ring frequency, BPF0-6.31 Hz Characteristic inner ring frequency, BPFI-7.23 Hz d-9.77 Hz
Read More ...
SKF 5212CZZG

r1s min-1 mm Radial clearance class-0.6 mm Mass (without HJ ring)-35 mm Dynamic load, C-72 mm Static load, C0-17 mm
Read More ...
TIMKEN 7204WN SU

Y0-7.25 Hz Mass-9.94 Hz ISO 355 reference-13.06 Hz Brand-72 mm Dynamic load, C-24 mm
Read More ...
SKF 5309C

r1a max-3.97 mm d-18.2 kN B--20 °C d1-100 °C e-0.82 kg
Read More ...
SKF 5207CG

D-7,800 rpm B-14,000 rpm D1--40 °C rs min-120 °C Number of lubrication holes-0.43 Hz
Read More ...
NACHI 5200-2NSL

A1-5.74 Hz A2-6.24 Hz B1-8.76 Hz d-77 mm d1-128 mm
Read More ...
NSK 3210J

Min operating temperature, Tmin-3.34 Max operating temperature, Tmax-2.2 Characteristic cage frequency, FTF-C4 Characteristic rolling element frequency, BSF-41.7 kg Characteristic outer ring frequency, BPF0-SNR
Read More ...

Related News

NSK Internal clearance's introduction

NSK Internal clearance is one of the most important factors affecting bearing performance. The bearing “internal clearance” is the relative movement of the outer and inner rings when they are lightly pushed in opposite directions....

Analysis of NSK new rolling bearing in Japan

NSK new rolling bearing having a "TL" Characteristics of roller bearings "TL" refers to the original properties of steel for special treatment, so as to obtain dimensional stability at high temperature and a raceway surface...

What is NSK Ball Bearing Units ?

The NSK bearing unit is a combination of a radial ball bearing, seal, and a housing of high-grade cast iron or pressed steel, which comes in various shapes.NSK Ball bearing units consist of a precision wide inner ring bearing assembled into a housing...