Product Details

Da - Outer Ring Backing Diameter:90.780 mm	da - Inner Ring Backing Diameter:56.007 mm
r - Outer Ring To Clear Radius3:1.5 mm	R - Inner Ring To Clear Radius2:1.5 mm
Design Units:METRIC	Bearing Weight:1.433 Kg
Cage Type:Snap In	Ball Type:STEEL
Ce - Dynamic Radial Rating1:106000 N	C0 - Static Radial Rating:81000 N

Product Description

Da - Outer Ring Backing Diameter	33 Nm
da - Inner Ring Backing Diameter	74.6 mm
r - Outer Ring To Clear Radius3	100 mm
R - Inner Ring To Clear Radius2	31.8 mm
Design Units	42 mm
Bearing Weight	13.5 mm
Cage Type	74.61 mm
Ball Type	113 mm
Ce - Dynamic Radial Rating1	160 mm
C0 - Static Radial Rating	5/8-18UNF

SKF 7315PJDU

C0-153 mm T min.-166 mm T max.-171 mm Weight-237 mm Recommended tightening torque for set screw-2.5 mm
Read More ...
SKF 3203 A-2RS1TN9/C3

Characteristic inner ring frequency, BPFI-22 Nm da min-74.6 mm dc min-92.1 mm Da max-23.9 mm ra max-30 mm
Read More ...
SKF 5316C

Min operating temperature, Tmin-9.09 Hz Max operating temperature, Tmax-11.91 Hz Characteristic cage frequency, FTF-214 mm Characteristic rolling element frequency, BSF-326 mm Characteristic outer ring frequency, BPF0-2.5 mm
Read More ...
SKF 9218UDT-BRZEA

Max operating temperature, Tmax-239 kN Characteristic cage frequency, FTF-1.4 Characteristic rolling element frequency, BSF-490 kN Characteristic outer ring frequency, BPF0-50.8 kN Characteristic inner ring frequency, BPFI-2,100 rpm
Read More ...
SKF 7317 BECBM

Rating life coefficient, A2-9.64 Hz Static load, C0-12.36 Hz Fatigue limit load, Cu-152 mm Nlim (oil)-213 mm Nlim (grease)-2 mm
Read More ...
SKF 3314 A/C3

C0-8 T min.-0.72 kN T max.-124 N/µm Weight-588 N/µm Recommended tightening torque for set screw--30 °C
Read More ...
SKF 3309 A

Recommended tightening torque for set screw-7.5 Hz B-55 mm B1-90 mm B2-11 mm C-WS81211
Read More ...
SKF 3310 A-2Z

Db min-0.72 Ca min-0.91 kg Cb min-T4CC075 ra max-NTN r1a max-106 kN
Read More ...
FAG BEARING 7222-B-MP-UA

Characteristic rolling element frequency, BSF-0.59 Characteristic outer ring frequency, BPF0-1.02 Characteristic inner ring frequency, BPFI-0.56 da min-0.25 kg da max-40 kN
Read More ...
SKF 3211 A-2Z/C3

d1-4.5 kg e-33 Nm Y2-74.6 mm Y0-100 mm Brand-31.8 mm
Read More ...
SKF 5206CZZ

Da max-1.4 kN ra max-0.06 kN d-12.5 D-32,000 rpm B--60 °C
Read More ...
SKF 3308 ENR/C3

Characteristic inner ring frequency, BPFI-1.1 mm da max-3 db min-5.4 mm Da min-2.5 mm Da max-0.27
Read More ...
SKF 5204CFF

Characteristic outer ring frequency, BPF0-P4 Characteristic inner ring frequency, BPFI-0.11 kg da min-SNR da max-16.4 kN Da max-11.7 kN
Read More ...

Related News

NSK Internal clearance's introduction

NSK Internal clearance is one of the most important factors affecting bearing performance. The bearing “internal clearance” is the relative movement of the outer and inner rings when they are lightly pushed in opposite directions....

Analysis of NSK new rolling bearing in Japan

NSK new rolling bearing having a "TL" Characteristics of roller bearings "TL" refers to the original properties of steel for special treatment, so as to obtain dimensional stability at high temperature and a raceway surface...

What is NSK Ball Bearing Units ?

The NSK bearing unit is a combination of a radial ball bearing, seal, and a housing of high-grade cast iron or pressed steel, which comes in various shapes.NSK Ball bearing units consist of a precision wide inner ring bearing assembled into a housing...