Product Details

Category:Angular Contact Ball Bearings	BDI Inventory:17.0
Manufacturer Name:NACHI	Minimum Buy Quantity:N/A
Weight / Kilogram:0.381	EAN:4991893840506
Product Group - BDI:B00308	Enclosure:Open
Flush Ground:Yes

Product Description

Category	47 mm
BDI Inventory	M6x1
Manufacturer Name	5 mm
Minimum Buy Quantity	0.6
Weight / Kilogram	7.5 mm
EAN	3 mm
Product Group - BDI	6.65 kN
Enclosure	-20 °C
Flush Ground	100 °C

SKF 5212CZZ

B2-70 mm C-95 mm C1-101.5 mm d-104 mm d1-4 mm
Read More ...
SKF 3317 A

Characteristic inner ring frequency, BPFI-7.76 Hz ra max-35 mm r1a max-37 mm d-44 mm B-57 mm
Read More ...
SKF 3306 A-2Z/C3

D-200 °C C-0.44 Hz Brand-7.41 Hz Min operating temperature, Tmin-9.13 Hz Max operating temperature, Tmax-11.87 Hz
Read More ...
NSK 7216BMPC

Radial clearance class-5.33 Hz Mass (without HJ ring)-6.58 Hz Brand-9.42 Hz Dynamic load, C-134 mm Static load, C0-131 mm
Read More ...
SKF 5305MG

Rating life coefficient, A2-0.81 Static load, C0-NTN Fatigue limit load, Cu-206 kN Nlim (oil)-1.4 Nlim (grease)-295 kN
Read More ...
SKF 3208 A

C-8.78 Hz C1-3.5 mm d-73.4 mm D-22.02 mm G-0.29
Read More ...
SKF 7221 BECBM

Max operating temperature, Tmax-36 mm Characteristic cage frequency, FTF-0.6 mm Characteristic rolling element frequency, BSF-17 mm Characteristic outer ring frequency, BPF0-40 mm Characteristic inner ring frequency, BPFI-12 mm
Read More ...
SKF 5206CFF

da min-120 °C Da max-0.42 Hz ra max-6.18 Hz d-7.6 Hz D-10.4 Hz
Read More ...
SKF 5209CZZ

Static load, C0-26.9 mm Fatigue limit load, Cu-28.84 mm Nref-8 mm Nlim-15 ° Min operating temperature, Tmin-0.3 mm
Read More ...
SKF 3308 A/C3

Characteristic rolling element frequency, BSF-0.31 kg Characteristic outer ring frequency, BPF0-T2BE040 Characteristic inner ring frequency, BPFI-59.5 kN da min-1.4 Da max-82.5 kN
Read More ...
FAG BEARING 7222-B-MP-UA

Y2-100 °C Y0-22 Nm Mass-T210- Dynamic load, C-UC210G2 Rating life coefficient, A2-16 mm
Read More ...
SKF 3313 A/C3

Dynamic load, C-17.38 mm Rating life coefficient, A2-58.5 mm Static load, C0-0.49 Fatigue limit load, Cu-1.23 Nlim (oil)-0.68
Read More ...

Related News

NSK Internal clearance's introduction

NSK Internal clearance is one of the most important factors affecting bearing performance. The bearing “internal clearance” is the relative movement of the outer and inner rings when they are lightly pushed in opposite directions....

Analysis of NSK new rolling bearing in Japan

NSK new rolling bearing having a "TL" Characteristics of roller bearings "TL" refers to the original properties of steel for special treatment, so as to obtain dimensional stability at high temperature and a raceway surface...

What is NSK Ball Bearing Units ?

The NSK bearing unit is a combination of a radial ball bearing, seal, and a housing of high-grade cast iron or pressed steel, which comes in various shapes.NSK Ball bearing units consist of a precision wide inner ring bearing assembled into a housing...