Product Details

Category:Angular Contact Ball Bearings	BDI Inventory:2.0
Manufacturer Name:SKF	Minimum Buy Quantity:N/A
Weight / Kilogram:0.684	EAN:0097741011969
Product Group - BDI:B00152	Enclosure:2 Seals
Flush Ground:No

Product Description

Category	35 mm
BDI Inventory	80 mm
Manufacturer Name	19.2 kN
Minimum Buy Quantity	-20 °C
Weight / Kilogram	100 °C
EAN	0.75 kg
Product Group - BDI	27 mm
Enclosure	43 mm
Flush Ground	9 mm

NSK 7312BEAMRSUCNB

g-0.6 g1-18.2 mm g2-3.97 mm h-11.2 kN h1--40 °C
Read More ...
NSK 5215JC3

Nlim (oil)-11.9 kN Nlim (grease)-6,400 rpm Min operating temperature, Tmin-4,800 rpm Max operating temperature, Tmax--40 °C Characteristic cage frequency, FTF-120 °C
Read More ...
SKF 3311 A

C1-1.85 d2-1.02 D-3.63 kg C0-NTN T min.-278 kN
Read More ...
SKF 7310PJDU

Radial clearance class-280 mm Mass (without HJ ring)-500 mm Dynamic load, C-130 mm Static load, C0-355 mm Fatigue limit load, Cu-434 mm
Read More ...
SKF 3309 A-2Z

Characteristic cage frequency, FTF-120 mm Characteristic rolling element frequency, BSF-29 mm Characteristic outer ring frequency, BPF0-106.5 mm Characteristic inner ring frequency, BPFI-70.5 mm da min-77.7 mm
Read More ...
BEARINGS LIMITED 5305 2RS/C3 PRX

Weight-1.5 mm Recommended tightening torque for set screw-1.5 mm B-75 mm C-130 mm C1-25 mm
Read More ...
KOYO 5308CD3

L-1.44 L1-0.79 N-0.18 kg s1-35.5 kN S-1.4
Read More ...
SKF 5207MFF

Rating life coefficient, A2-0.69 kg Static load, C0-5.5 Nm Fatigue limit load, Cu-F204N- Nlim (oil)-EX203G2T20 Nlim (grease)-SCCE204
Read More ...
SKF 7308 BE-2RZP/GWF

Characteristic cage frequency, FTF-86.79 mm Characteristic rolling element frequency, BSF-2.7 mm Characteristic outer ring frequency, BPF0-3 mm Characteristic inner ring frequency, BPFI-0.6 mm da min-96.5 mm
Read More ...
SKF 5204CZZ

Characteristic cage frequency, FTF-125.3 mm Characteristic rolling element frequency, BSF-95.3 mm Characteristic outer ring frequency, BPF0-101.2 mm Characteristic inner ring frequency, BPFI-2 mm da max-2 mm
Read More ...
TIMKEN 5202KDD

k-0.92 kg e-68.5 kN Y1-75 kN Y2-9.1 kN Y0-7,600 rpm
Read More ...
SKF 5212M

S-0.45 Hz SW-9.48 Hz C0-12.6 Hz T min.-15.4 Hz T max.-221 mm
Read More ...
SKF 3210 A-2RS1/C3

Designation of housing-84.2 mm Designation of bearing-2.1 mm B-2.1 mm A-C3 A1-2.02 kg
Read More ...
SKF 5202SBKFF

d-5.56 mm d1-51.8 kN e--20 °C G-100 °C H-2.65 kg
Read More ...

Related News

NSK Internal clearance's introduction

NSK Internal clearance is one of the most important factors affecting bearing performance. The bearing “internal clearance” is the relative movement of the outer and inner rings when they are lightly pushed in opposite directions....

Analysis of NSK new rolling bearing in Japan

NSK new rolling bearing having a "TL" Characteristics of roller bearings "TL" refers to the original properties of steel for special treatment, so as to obtain dimensional stability at high temperature and a raceway surface...

What is NSK Ball Bearing Units ?

The NSK bearing unit is a combination of a radial ball bearing, seal, and a housing of high-grade cast iron or pressed steel, which comes in various shapes.NSK Ball bearing units consist of a precision wide inner ring bearing assembled into a housing...