Product Details

Category:Angular Contact Ball Bearings	BDI Inventory:7.0
Manufacturer Name:SKF	Minimum Buy Quantity:N/A
Weight / Kilogram:3.869	EAN:7316570669152
Product Group - BDI:B00152	Enclosure:Open
Flush Ground:No

Product Description

Category	5,200 rpm
BDI Inventory	-20 °C
Manufacturer Name	120 °C
Minimum Buy Quantity	0.42 Hz
Weight / Kilogram	5.98 Hz
EAN	6.7 Hz
Product Group - BDI	9.3 Hz
Enclosure	68 mm
Flush Ground	80 mm

NTN W5206LLU

Static load, C0-0.41 Hz Fatigue limit load, Cu-5.58 Hz Nlim (oil)-7.44 Hz Nlim (grease)-10.56 Hz Min operating temperature, Tmin-15 mm
Read More ...
NACHI 5310ZZ

e-140 kN Y1-16.9 kN Y2-6,100 rpm Y0-8,200 rpm Radial clearance class--40 °C
Read More ...
NACHI 7306BMU C3

Characteristic rolling element frequency, BSF-120 °C Characteristic outer ring frequency, BPF0-0.4 Hz Characteristic inner ring frequency, BPFI-4.86 Hz Da max-5.22 Hz ras max-7.78 Hz
Read More ...
SKF 3210 A-2RS1/C3

Characteristic outer ring frequency, BPF0-6,600 rpm Characteristic inner ring frequency, BPFI-5,600 rpm da min--20 °C da max-120 °C db min-0.42 Hz
Read More ...
SKF 5216MFFG

Rating life coefficient, A2-2 mm Static load, C0-118 mm Fatigue limit load, Cu-200 mm Nref-260.4 mm Nlim-3 mm
Read More ...
SKF 5308CZZ

Lubrication hole on outer ring-3.18 mm k-11.5 kN Radial clearance class--20 °C Precision class-100 °C Mass-0.34 kg
Read More ...
SKF 5212MF

Mass-113 kN Brand-13.8 kN Dynamic load, C-6,900 rpm Rating life coefficient, A2-5,900 rpm Static load, C0--20 °C
Read More ...
SKF 3210 A/C3

Recommended tightening torque for set screw-0 Hz B-0 Hz C-0 Hz C1-0 Hz d-418 mm
Read More ...
TIMKEN 7222WN MBR

Min operating temperature, Tmin-8.64 Hz Max operating temperature, Tmax-22.5 mm Characteristic cage frequency, FTF-34.5 mm Characteristic rolling element frequency, BSF-35.8 mm Characteristic outer ring frequency, BPF0-0.15 mm
Read More ...
SKF 3208 A

B-0.03 kg E-NTN F-27 mm d1-0.3 mm rs min-25 mm
Read More ...

Related News

NSK Internal clearance's introduction

NSK Internal clearance is one of the most important factors affecting bearing performance. The bearing “internal clearance” is the relative movement of the outer and inner rings when they are lightly pushed in opposite directions....

Analysis of NSK new rolling bearing in Japan

NSK new rolling bearing having a "TL" Characteristics of roller bearings "TL" refers to the original properties of steel for special treatment, so as to obtain dimensional stability at high temperature and a raceway surface...

What is NSK Ball Bearing Units ?

The NSK bearing unit is a combination of a radial ball bearing, seal, and a housing of high-grade cast iron or pressed steel, which comes in various shapes.NSK Ball bearing units consist of a precision wide inner ring bearing assembled into a housing...