Product Details

Category:Angular Contact Ball Bearings	BDI Inventory:6.0
Manufacturer Name:NSK	Minimum Buy Quantity:N/A
Weight / Kilogram:1.77	EAN:0029176073595
Product Group - BDI:B00152	Enclosure:2 Seals
Flush Ground:No

Product Description

Category	23 mm
BDI Inventory	M10X1.25
Manufacturer Name	12 mm
Minimum Buy Quantity	0.6 mm
Weight / Kilogram	4 mm
EAN	17 mm
Product Group - BDI	4 mm
Enclosure	1.5 mm
Flush Ground	6.3 mm

SKF 7305PJDU

ra max-5.5 Nm r1a max-1.9 mm d-15.9 mm D-4.2 mm B-44.5 mm
Read More ...
NACHI 5310ZZ

Nlim (oil)-0.3 mm Nlim (grease)-12 mm Min operating temperature, Tmin-24 mm Max operating temperature, Tmax-14 mm Characteristic cage frequency, FTF-13 mm
Read More ...
NSK 5206-2RSTNC3

Recommended tightening torque for set screw-3,300 rpm B-2,500 rpm B1--40 °C B2-120 °C C-0.44 Hz
Read More ...
FAG BEARING 3308-BD-2Z

Mass-4,500 rpm ISO 355 reference-3,300 rpm Dynamic load, C--40 °C Rating life coefficient, A2-120 °C Static load, C0-0.44 Hz
Read More ...
TIMKEN 5211WD

Ce min-8.36 Hz Da max-10.64 Hz ra max-3.5 mm d-3.3 mm D-44.45 mm
Read More ...
SKF 7214 BECBM

Static load, C0-3.66 kg Fatigue limit load, Cu-NTN Nref-249 kN Nlim-305 kN Min operating temperature, Tmin-33.6 kN
Read More ...
SKF 5203SBKZZ

Y0-97.5 mm Mass-73.5 mm ISO 355 reference-78.4 mm Brand-1.5 mm Dynamic load, C-1.5 mm
Read More ...
BEARINGS LIMITED 5302 ZZ/C3

B-0.14 kg A-SNR A1-15.8 kN A2-7.9 kN d-0.36 kN
Read More ...
SKF 3310 A/C3

e-10,000 rpm Y2--25 °C Y0-110 °C Mass-0.38 Hz ISO 355 reference-4.12 Hz
Read More ...
SKF 9218UDT-BRZEA

r-1.5 mm S-1.5 mm SW-CN C0-1.13 kg T min.-NTN
Read More ...
SKF 3305 A/C3

ra max-1.72 d1-2.57 e-1.69 Y2-CN Y0-NTN
Read More ...
SKF 3310 ANR/C3

Da max-55.56 mm ra max-100 mm d-3/8-24UNF D-9 mm B-1.1
Read More ...

Related News

NSK Internal clearance's introduction

NSK Internal clearance is one of the most important factors affecting bearing performance. The bearing “internal clearance” is the relative movement of the outer and inner rings when they are lightly pushed in opposite directions....

Analysis of NSK new rolling bearing in Japan

NSK new rolling bearing having a "TL" Characteristics of roller bearings "TL" refers to the original properties of steel for special treatment, so as to obtain dimensional stability at high temperature and a raceway surface...

What is NSK Ball Bearing Units ?

The NSK bearing unit is a combination of a radial ball bearing, seal, and a housing of high-grade cast iron or pressed steel, which comes in various shapes.NSK Ball bearing units consist of a precision wide inner ring bearing assembled into a housing...