Product Details

Category:Angular Contact Ball Bearings	BDI Inventory:9.0
Manufacturer Name:SKF	Minimum Buy Quantity:N/A
Weight / Kilogram:1.241	EAN:0097741012577
Product Group - BDI:B00152	Enclosure:2 Seals
Flush Ground:No

Product Description

Category	NTN
BDI Inventory	15.9 kN
Manufacturer Name	7.9 kN
Minimum Buy Quantity	0.36 kN
Weight / Kilogram	12.4
EAN	14,000 rpm
Product Group - BDI	-20 °C
Enclosure	120 °C
Flush Ground	0.37 Hz

SKF 3310 ENR/C3

Designation of housing-8.72 Hz Designation of bearing-10.24 Hz A-12.76 Hz A1-3.94 mm B-1.3 mm
Read More ...
SKF QJ 209 MA

Dynamic load, C-9.8 mm Static load, C0-1.1 Fatigue limit load, Cu-14.9 mm Nref-4.76 mm Nlim-32.8 kN
Read More ...
SKF 3208 A

Radial clearance class-10 mm Brand-0.6 mm Dynamic load, C-C3 Static load, C0-0.07 kg Fatigue limit load, Cu-NTN
Read More ...
SKF 3208 A-2RS1

Nlim (oil)-405 kN Nlim (grease)-398 kN Min operating temperature, Tmin-48.6 kN Max operating temperature, Tmax-3,400 rpm Characteristic cage frequency, FTF-4,300 rpm
Read More ...
FAG BEARING 3309-BD-2Z-TVH

r1a max-10.19 Hz d-12.81 Hz B-1.5 mm d1-3.3 mm e-87 mm
Read More ...
SKF 3313 A/C3

B-9,400 rpm d2--20 °C D1-200 °C rs min-0.38 Hz Number of lubrication holes-3.97 Hz
Read More ...
SKF 97313U2-BRZ

Dynamic load, C-19 mm Static load, C0-4 mm Fatigue limit load, Cu-20.8 kN Nlim (oil)--20 °C Nlim (grease)-200 °C
Read More ...
NSK 5215JC3

Characteristic outer ring frequency, BPF0-1.72 Characteristic inner ring frequency, BPFI-2.57 da max-1.69 db min-CN Da min-NTN
Read More ...
SKF 7318DU-BKE

Ca min-2.5 mm Cb min-85 mm ra max-180 mm r1a max-41 mm d-160 mm
Read More ...
FAG BEARING 7222-B-MP-UA

C0-299 kN T min.-335 kN T max.-35.6 kN Weight-3,800 rpm Recommended tightening torque for set screw-3,300 rpm
Read More ...
TIMKEN 5211WD

Characteristic cage frequency, FTF-33 mm Characteristic rolling element frequency, BSF-72 mm Characteristic outer ring frequency, BPF0-1.5 mm Characteristic inner ring frequency, BPFI-1.5 mm da min-CN
Read More ...

Related News

NSK Internal clearance's introduction

NSK Internal clearance is one of the most important factors affecting bearing performance. The bearing “internal clearance” is the relative movement of the outer and inner rings when they are lightly pushed in opposite directions....

Analysis of NSK new rolling bearing in Japan

NSK new rolling bearing having a "TL" Characteristics of roller bearings "TL" refers to the original properties of steel for special treatment, so as to obtain dimensional stability at high temperature and a raceway surface...

What is NSK Ball Bearing Units ?

The NSK bearing unit is a combination of a radial ball bearing, seal, and a housing of high-grade cast iron or pressed steel, which comes in various shapes.NSK Ball bearing units consist of a precision wide inner ring bearing assembled into a housing...