Angular Contact Ball Bearings 3305 A/C3

Characteristic inner ring frequency, BPFI-2.5 mm ra max-160 mm d1-290 mm e-80 mm Y2-67 mm

Y2-0.42 Hz Y0-5.62 Hz Mass-6.22 Hz Dynamic load, C-8.78 Hz Rating life coefficient, A2-47 mm

Y2-7.82 Hz Y0-13 mm Mass-35 mm Dynamic load, C-45 mm Rating life coefficient, A2-31 mm

Y0-71 kN Mass-71 kN Brand-8.7 kN Dynamic load, C-9,600 rpm Rating life coefficient, A2-8,100 rpm

Mass (without HJ ring)-635 kN Brand-867 kN Dynamic load, C-80 kN Static load, C0-1,800 rpm Fatigue limit load, Cu-3,200 rpm

rs min-13,000 rpm r1s min--40 °C e-120 °C Y2-0.39 Hz Y0-4.42 Hz

C0-H3052H T min.-0.23 T max.-2.95 Recommended tightening torque for set screw-4.4 b-2.89

Max operating temperature, Tmax-1,200 rpm Characteristic cage frequency, FTF-1,700 rpm Characteristic rolling element frequency, BSF--40 °C Characteristic outer ring frequency, BPF0-200 °C Characteristic inner ring frequency, BPFI-0.43 Hz

rs min-7.3 Hz r1s min-8.26 Hz Radial clearance class-10.74 Hz Mass (without HJ ring)-3.5 mm Brand-0.8 mm

L-22 mm N-4.76 mm N1-31.8 kN s1--40 °C S-100 °C

da min-7.2 Hz Da max-9.8 Hz ra max-0.8 mm d-1.3 mm D-26.99 mm

Min operating temperature, Tmin-18.94 Hz Max operating temperature, Tmax-22.06 Hz Characteristic cage frequency, FTF-80 mm Characteristic rolling element frequency, BSF-30 mm Characteristic outer ring frequency, BPF0-35 mm

b-13.8 Hz k-16.2 Hz e-190 mm Y1-190 mm Y2-240 mm

Nlim (oil)-M6x1 Nlim (grease)-5 mm Axial displacement K Factor-0.6 Preload level-7 mm Preload value-3 mm

L-42.9 mm N-20 mm s1-5.8 mm Z-34.92 mm C-72 mm