Product Details

Bore Type:Cylindrical Bore	Enclosure:Double Seal
Configuration:Single Row	Weight:0.026 kg
Bore Size:30 mm	Outside Diameter:42 mm
Width:7 mm	Fillet Radius/Chamfer:0.3 mm
Dynamic Load Rating:5,350 N	Static Load Rating:3,800 N

Product Description

Bore Type	-40 °C
Enclosure	120 °C
Configuration	0.43 Hz
Weight	6.5 Hz
Bore Size	7.68 Hz
Outside Diameter	10.32 Hz
Width	3.5 mm
Fillet Radius/Chamfer	2 mm
Dynamic Load Rating	67 mm
Static Load Rating	16.64 mm

NACHI 63/32-2NSE9

Characteristic rolling element frequency, BSF--40 °C Characteristic outer ring frequency, BPF0-120 °C Characteristic inner ring frequency, BPFI-0.45 Hz ra max-9.32 Hz r1a max-10.78 Hz
Read More ...
NACHI 6800-2NSE9C3

C-6.65 kN C1--40 °C d-100 °C D-0.7 kg G-3.7 Nm
Read More ...
NACHI 6010-2NSE9C3

Nlim (oil)-82 mm Nlim (grease)-2 mm Min operating temperature, Tmin-1.5 mm Max operating temperature, Tmax-0.4 Characteristic cage frequency, FTF-1.48
Read More ...
NACHI 6806-2NSE9

Axial rigidity-2,700 rpm Radial rigidity--40 °C Min operating temperature, Tmin-120 °C Max operating temperature, Tmax-0.43 Hz Characteristic cage frequency, FTF-6.89 Hz
Read More ...
NACHI 63/28-2NSE9_1

Radial clearance class-NTN Mass (without HJ ring)--40 °C Brand-120 °C Dynamic load, C-3.3 mm Static load, C0-85.72 mm
Read More ...
NACHI 6319-2NSLC3

C0-120 mm T min.-23 mm T max.-108.5 mm Weight-78.5 mm Recommended tightening torque for set screw-104.3 mm
Read More ...
NACHI 6907-2NSE9

a-38.28 mm rs min-0.47 r1s min-1.28 e-0.7 Y2-3.86 kg
Read More ...
NACHI 6906-2NSE9C3

Y0-51.1 mm Brand-72 mm Dynamic load, C-5/16-24UNF Rating life coefficient, A2-6.5 mm Static load, C0-1.1
Read More ...
NACHI 6906-2NSE9

Min operating temperature, Tmin-0.62 kg Max operating temperature, Tmax-NTN Characteristic cage frequency, FTF-80.5 kN Characteristic rolling element frequency, BSF-1.9 Characteristic outer ring frequency, BPF0-97 kN
Read More ...
NACHI 6808-2NSE9

Static load, C0-5.65 Hz Fatigue limit load, Cu-8.35 Hz Nlim (oil)-54 mm Nlim (grease)-91 mm Min operating temperature, Tmin-1.5 mm
Read More ...

Related News

NSK Internal clearance's introduction

NSK Internal clearance is one of the most important factors affecting bearing performance. The bearing “internal clearance” is the relative movement of the outer and inner rings when they are lightly pushed in opposite directions....

Analysis of NSK new rolling bearing in Japan

NSK new rolling bearing having a "TL" Characteristics of roller bearings "TL" refers to the original properties of steel for special treatment, so as to obtain dimensional stability at high temperature and a raceway surface...

What is NSK Ball Bearing Units ?

The NSK bearing unit is a combination of a radial ball bearing, seal, and a housing of high-grade cast iron or pressed steel, which comes in various shapes.NSK Ball bearing units consist of a precision wide inner ring bearing assembled into a housing...