Product Details

UPC:782475424900	Ship Weight:18 LB
Special Coating:STANDARD PAINT	Screw Treatment:ZINC PLATED
Screw Diameter:0.7500 in	Material Type:CARBON STEEL
Frame Size:20	Angle Size:2 X 2 X 1/4
Take-Up Frame Travel:24.0000 in

Product Description

UPC	18 mm
Ship Weight	6.2 mm
Special Coating	40 mm
Screw Treatment	58 mm
Screw Diameter	80 mm
Material Type	M8x1
Frame Size	6.5 mm
Angle Size	1.1
Take-Up Frame Travel	11 mm

Baldor-Dodge WSEZ-308X12-TUFR-SSS

Max operating temperature, Tmax-120 °C Characteristic cage frequency, FTF-26 mm Characteristic rolling element frequency, BSF-12 mm Characteristic outer ring frequency, BPF0-2.75 mm Characteristic inner ring frequency, BPFI-0.3 mm
Read More ...
Baldor-Dodge TP-30X18-TUFR

Da max--40 °C ra max-120 °C d-1.5 mm D-19.3 mm B-2.3 mm
Read More ...
Baldor-Dodge TUFR-BO-008X4

D-5,300 rpm B--20 °C C-120 °C T-0.43 Hz d1-7.46 Hz
Read More ...
Baldor-Dodge WS-300X3-TUFR

Contact angle α-10.19 Hz rs min-12.81 Hz r1s min-6.8 mm f0-3.3 mm Precision class-73.02 mm
Read More ...
Baldor-Dodge HD-350X24-TUFR

Recommended tightening torque for set screw-1 mm B-51.4 mm C-49.2 mm C1-46.9 mm d-60.91 mm
Read More ...
Baldor-Dodge TP-10X12-TUFR

d-0.3 mm d1-Non/No D-1.5 mm G-P0 m-0.0087 kg
Read More ...
Baldor-Dodge LD-45X48-TUFR-SSS

Nref-100 mm Nlim-23 mm Min operating temperature, Tmin-17.5 mm Max operating temperature, Tmax-23 mm Characteristic cage frequency, FTF-82.9 mm
Read More ...
Baldor-Dodge HD-300X18-TUFR-SSS

dc min-100 mm Da max-139 mm ra max-2 mm d-70 mm D-150 mm
Read More ...
Baldor-Dodge HD-350X18-TUFR-SSS

Characteristic outer ring frequency, BPF0-0.84 Characteristic inner ring frequency, BPFI-0.34 kg ra max-T3CC045 r1a max-SNR a-58.3 kN
Read More ...
Baldor-Dodge WS-502X24-TUFR

Static load, C0-107 mm Fatigue limit load, Cu-158 mm Nlim (oil)-2 mm Nlim (grease)-43 mm Min operating temperature, Tmin-152.8 mm
Read More ...
Baldor-Dodge P2B-BO-010

ra max-NTN d--40 °C D-120 °C B-1.5 mm E-186 mm
Read More ...
Baldor-Dodge WSEZ-308X9-TUFR-SSS

ISO 355 reference-176 mm Brand-2.5 mm Dynamic load, C-95 mm Rating life coefficient, A2-200 mm Static load, C0-67 mm
Read More ...
Baldor-Dodge TS-100X6-TUFR

Mass-10 mm Dynamic load, C-4.5 mm Rating life coefficient, A2-H3124 Static load, C0-0.28 Fatigue limit load, Cu-2.43
Read More ...
Baldor-Dodge LD-20X36-TUFR

Y2-12 mm Y0-3.6 mm Mass-12 mm Dynamic load, C-40 mm Rating life coefficient, A2-M5x0,8
Read More ...

Related News

NSK Internal clearance's introduction

NSK Internal clearance is one of the most important factors affecting bearing performance. The bearing “internal clearance” is the relative movement of the outer and inner rings when they are lightly pushed in opposite directions....

Analysis of NSK new rolling bearing in Japan

NSK new rolling bearing having a "TL" Characteristics of roller bearings "TL" refers to the original properties of steel for special treatment, so as to obtain dimensional stability at high temperature and a raceway surface...

What is NSK Ball Bearing Units ?

The NSK bearing unit is a combination of a radial ball bearing, seal, and a housing of high-grade cast iron or pressed steel, which comes in various shapes.NSK Ball bearing units consist of a precision wide inner ring bearing assembled into a housing...