Product Details

UPC:782475274079	Ship Weight:185.9 LB
Special Coating:STANDARD PAINT	Screw Treatment:ZINC PLATED
Screw Diameter:1.2500 in	Material Type:CARBON STEEL
Frame Size:350	Angle Size:5 X 5 X 1/2
Take-Up Frame Travel:12.0000 in

Product Description

UPC	120 °C
Ship Weight	0.4 Hz
Special Coating	4.71 Hz
Screw Treatment	5.18 Hz
Screw Diameter	7.82 Hz
Material Type	64 mm
Frame Size	69 mm
Angle Size	111 mm
Take-Up Frame Travel	2 mm

Baldor-Dodge TP-10X12-TUFR-SSS

D-65 mm G-73 mm m-92 mm r-1.5 mm S-55 mm
Read More ...
Baldor-Dodge WSEZ-300X12-TUFR-SSS

Characteristic outer ring frequency, BPF0-37.6 mm Characteristic inner ring frequency, BPFI-51.1 mm da max-17.5 mm db min-20 mm Da min-5.8 mm
Read More ...
Baldor-Dodge HD-400X12-TUFR

db min-91.3 mm Da max-131.5 mm ra max-2 mm r1a max-80 mm d-140 mm
Read More ...
Baldor-Dodge HD-200X12-TUFR-SSS

db min-195 mm Da min-207 mm Da max-3 mm Db min-3 mm Ca min-C4
Read More ...
Baldor-Dodge TS-300X12-TUFR-GF

Da max-1 mm Db min-C3 Ca min-0.25 kg Cb min-SNR ra max-21.5 kN
Read More ...
Baldor-Dodge LD-45X42-TUFR

Dw-5,700 rpm Lw-7,500 rpm Lubrication hole on outer ring--40 °C Radial clearance class-200 °C Precision class-0.42 Hz
Read More ...
Baldor-Dodge HD-350X18-TUFR-SSS

Characteristic rolling element frequency, BSF--20 °C Characteristic outer ring frequency, BPF0-100 °C Characteristic inner ring frequency, BPFI-0.31 kg da min-8 Nm da max-23.8 mm
Read More ...
Baldor-Dodge F4B-BO-014

Static load, C0-0.41 Hz Fatigue limit load, Cu-5.27 Hz Nlim (oil)-6.57 Hz Nlim (grease)-9.43 Hz Min operating temperature, Tmin-83 mm
Read More ...
Baldor-Dodge WSEZ-400X3-TUFR-SSS

Characteristic outer ring frequency, BPF0-CM Characteristic inner ring frequency, BPFI-0.02 kg Fw-NTN D-5.1 kN C-2.39 kN
Read More ...
Baldor-Dodge WS-308X12-TUFR-SSS

Mass-380 mm ISO 355 reference-4 mm Brand-190 mm Dynamic load, C-400 mm Rating life coefficient, A2-132 mm
Read More ...
Baldor-Dodge LD-30X24-TUFR

Max operating temperature, Tmax-0.99 Characteristic cage frequency, FTF-0.25 kg Characteristic rolling element frequency, BSF-43.5 kN Characteristic outer ring frequency, BPF0-1.4 Characteristic inner ring frequency, BPFI-57 kN
Read More ...

Related News

NSK Internal clearance's introduction

NSK Internal clearance is one of the most important factors affecting bearing performance. The bearing “internal clearance” is the relative movement of the outer and inner rings when they are lightly pushed in opposite directions....

Analysis of NSK new rolling bearing in Japan

NSK new rolling bearing having a "TL" Characteristics of roller bearings "TL" refers to the original properties of steel for special treatment, so as to obtain dimensional stability at high temperature and a raceway surface...

What is NSK Ball Bearing Units ?

The NSK bearing unit is a combination of a radial ball bearing, seal, and a housing of high-grade cast iron or pressed steel, which comes in various shapes.NSK Ball bearing units consist of a precision wide inner ring bearing assembled into a housing...