Product Details

UPC:782475418466	Ship Weight:51.69 LB
Special Coating:STANDARD PAINT	Screw Treatment:ZINC PLATED
Screw Diameter:1.5000 in	Material Type:CARBON STEEL
Frame Size:515	Angle Size:2-1/2 X 2 X 1/4
Take-Up Frame Travel:18.0000 in

Product Description

UPC	5.9 kN
Ship Weight	0.37 kN
Special Coating	40,000 rpm
Screw Treatment	28,000 rpm
Screw Diameter	0.73
Material Type	7
Frame Size	0.08 kN
Angle Size	83 N/µm
Take-Up Frame Travel	184 N/µm

Baldor-Dodge HD-200X18-TUFR-SSS

Da max-5 kg Db-SNR ras max-471 kN Fw-575 kN D-46.3 kN
Read More ...
Baldor-Dodge LD-50X6-TUFR

ra max-5.9 kN D6-0.37 kN d1-28,000 rpm d2-0.73 D1-7
Read More ...
Baldor-Dodge HD-300X36-TUFR-SSS

Static load, C0-5.79 Hz Fatigue limit load, Cu-6.24 Hz Nref-8.76 Hz Nlim-51.5 mm Min operating temperature, Tmin-61 mm
Read More ...
Baldor-Dodge HD-500X60-TUFR

Recommended tightening torque for set screw-7.68 Hz B-10.32 Hz C-3.5 mm C1-1.3 mm d-47.62 mm
Read More ...
Baldor-Dodge TS-350X18-TUFR-GF

B1-194 kN B2-1.4 C-262 kN C1-31.9 kN d-3,800 rpm
Read More ...
Baldor-Dodge WS-502X15-TUFR

Static load, C0-120 °C Fatigue limit load, Cu-0.4 Hz Nref-4.48 Hz Nlim-4.36 Hz Min operating temperature, Tmin-6.64 Hz
Read More ...
Baldor-Dodge F4B-BAP-300

Fatigue limit load, Cu-0.6 mm Nref-35 mm Nlim-72 mm Min operating temperature, Tmin-23 mm Max operating temperature, Tmax-64 mm
Read More ...
Baldor-Dodge HD-350X12-TUFR-SSS

Dynamic load, C-5.42 Hz Rating life coefficient, A2-30 mm Static load, C0-31.8 mm Fatigue limit load, Cu-47 mm Nlim (oil)-1 mm
Read More ...
Baldor-Dodge TP-50X18-TUFR-SSS

B--40 °C C-200 °C C1-0.44 Hz d-8.6 Hz D-10.65 Hz
Read More ...
Baldor-Dodge WSEZ-400X9-TUFR-SSS

C-C3 F-3.3 kg B-SNR B1-384 kN B2-398 kN
Read More ...
Baldor-Dodge NS-400X9-TUFR

ra max-10 Hz r1a max-12 mm d-18 mm D-12 mm B-2.7 mm
Read More ...
Baldor-Dodge LD-50X18-TUFR-SSS

S-1.5 mm SW-CN C0-1.62 kg T min.-NTN T max.-130 kN
Read More ...
Baldor-Dodge WS-300X3-TUFR

k-85 mm e-1 mm Y1-85 mm Y2-110 mm Y0-110 mm
Read More ...

Related News

NSK Internal clearance's introduction

NSK Internal clearance is one of the most important factors affecting bearing performance. The bearing “internal clearance” is the relative movement of the outer and inner rings when they are lightly pushed in opposite directions....

Analysis of NSK new rolling bearing in Japan

NSK new rolling bearing having a "TL" Characteristics of roller bearings "TL" refers to the original properties of steel for special treatment, so as to obtain dimensional stability at high temperature and a raceway surface...

What is NSK Ball Bearing Units ?

The NSK bearing unit is a combination of a radial ball bearing, seal, and a housing of high-grade cast iron or pressed steel, which comes in various shapes.NSK Ball bearing units consist of a precision wide inner ring bearing assembled into a housing...