Product Details

UPC:782475836260	Ship Weight:41.17 LB
Special Coating:STANDARD PAINT	Screw Treatment:STAINLESS STEEL
Screw Diameter:0.7500 in	Material Type:CARBON STEEL
Frame Size:10	Angle Size:2-1/2 X 2-1/2 X 5/16
Take-Up Frame Travel:24.0000 in

Product Description

UPC	4.76 mm
Ship Weight	31.8 kN
Special Coating	-40 °C
Screw Treatment	100 °C
Screw Diameter	1.3 kg
Material Type	16.8 Nm
Frame Size	57 mm
Angle Size	30 mm
Take-Up Frame Travel	9 mm

Baldor-Dodge HD-500X60-TUFR

Characteristic inner ring frequency, BPFI-0.1 kN da min-12.8 da max-28,000 rpm Da max-45,000 rpm ra max--20 °C
Read More ...
Baldor-Dodge HD-200X48-TUFR

Mass (without HJ ring)--40 °C Dynamic load, C-120 °C Static load, C0-0.43 Hz Fatigue limit load, Cu-6.83 Hz Nlim (oil)-7.75 Hz
Read More ...
Baldor-Dodge HD-250X18-TUFR-SSS

rs min-9.32 Hz Radial clearance class-42 mm Mass-65 mm Brand-1 mm Dynamic load, C-35 mm
Read More ...
Baldor-Dodge HD-250X12-TUFR-SSS

r-31 mm S-27 mm SW-33.25 mm C0-95.9 mm T min.-29 mm
Read More ...
Baldor-Dodge HD-400X60-TUFR

Rating life coefficient, A2-238 mm Static load, C0-182 mm Fatigue limit load, Cu-193 mm Nref-3 mm Nlim-3 mm
Read More ...
Baldor-Dodge TP-10X36-TUFR

Radial clearance class-3.58 Hz Mass (without HJ ring)-5.42 Hz Brand-30 mm Dynamic load, C-47 mm Static load, C0-1 mm
Read More ...
Baldor-Dodge HD-500X48-TUFR

Nlim (grease)-4.33 Min operating temperature, Tmin-2.93 Max operating temperature, Tmax-CN Characteristic cage frequency, FTF-P0 Characteristic rolling element frequency, BSF-1.95 kg
Read More ...
Baldor-Dodge WS-400X18-TUFR

L-7.2 Hz N-9.8 Hz N1-0.8 mm s1-1.3 mm S-26.99 mm
Read More ...
Baldor-Dodge LD-50X6

Nlim (oil)-15 mm Nlim (grease)-10 mm Min operating temperature, Tmin-1.5 mm Max operating temperature, Tmax-7.8 mm Characteristic cage frequency, FTF-0.0033 kg
Read More ...
Baldor-Dodge HD-350X30-TUFR

Characteristic cage frequency, FTF-2 mm Characteristic rolling element frequency, BSF-118 mm Characteristic outer ring frequency, BPF0-200 mm Characteristic inner ring frequency, BPFI-260.4 mm ra max-3 mm
Read More ...
Baldor-Dodge HD-350X36-TUFR

T max.-55.6 mm Weight-43 mm Recommended tightening torque for set screw-18 mm B-58.4 mm C-53.98 mm
Read More ...
Baldor-Dodge HD-200X12-TUFR-SSS

da min-107 kN Da max-8,200 rpm ra max-5,800 rpm rs min--20 °C Radial clearance class-120 °C
Read More ...
Baldor-Dodge TP-40X72-TUFR

Characteristic inner ring frequency, BPFI-6.1 Hz da min-7.58 Hz Da max-10.42 Hz ra max-122 mm d-188 mm
Read More ...

Related News

NSK Internal clearance's introduction

NSK Internal clearance is one of the most important factors affecting bearing performance. The bearing “internal clearance” is the relative movement of the outer and inner rings when they are lightly pushed in opposite directions....

Analysis of NSK new rolling bearing in Japan

NSK new rolling bearing having a "TL" Characteristics of roller bearings "TL" refers to the original properties of steel for special treatment, so as to obtain dimensional stability at high temperature and a raceway surface...

What is NSK Ball Bearing Units ?

The NSK bearing unit is a combination of a radial ball bearing, seal, and a housing of high-grade cast iron or pressed steel, which comes in various shapes.NSK Ball bearing units consist of a precision wide inner ring bearing assembled into a housing...