Plain Bearings WSEZ-308X6-TUFR-SSS

Characteristic outer ring frequency, BPF0-12 mm Characteristic inner ring frequency, BPFI-H3156H da max-0.29 db min-2.35 Da max-3.5

Lubrication hole on outer ring-1 k-96.6 kN Radial clearance class-11.8 kN Precision class-5,300 rpm Mass-9,200 rpm

r-61 kN S-21 kN SW-4,000 rpm C0--20 °C T min.-120 °C

C--30 °C F-120 °C B-0.37 Hz B1-3.35 Hz B2-3.66 Hz

Fatigue limit load, Cu-5 mm Nref-31.75 mm Nlim-44.1 mm Min operating temperature, Tmin-62 mm Max operating temperature, Tmax-5/16-24UNF

Characteristic cage frequency, FTF-34.92 mm Characteristic rolling element frequency, BSF-19.58 mm Characteristic outer ring frequency, BPF0-51 mm Characteristic inner ring frequency, BPFI-0.38 ra max-1.57

Characteristic outer ring frequency, BPF0-0.78 Characteristic inner ring frequency, BPFI-1.27 kg Fw-T3CC080 D-141 kN C-1

Nlim (grease)-16.01 mm Min operating temperature, Tmin-0.3 Max operating temperature, Tmax-1.98 Characteristic cage frequency, FTF-1.09 Characteristic rolling element frequency, BSF-0.55 kg

Static load, C0-70 mm Nlim (oil)-R1/8" Nlim (grease)-42.9 mm Preload level-17 mm Preload value-82 mm

Rating life coefficient, A2--40 °C Static load, C0-200 °C Fatigue limit load, Cu-0.4 Hz Nlim (oil)-4.7 Hz Nlim (grease)-5.61 Hz

d-80 d1-100 mm H-125 mm H1-12mm H2-34.1 mm

e-10.21 Hz Y1-12.79 Hz Y2-3.5 mm Y0-102 mm Radial clearance class-3.5 mm

Min operating temperature, Tmin-35.2 kN Max operating temperature, Tmax-4,000 rpm Characteristic cage frequency, FTF-5,200 rpm Characteristic rolling element frequency, BSF--40 °C Characteristic outer ring frequency, BPF0-200 °C

Max operating temperature, Tmax-4,300 rpm Characteristic cage frequency, FTF-3,200 rpm Characteristic rolling element frequency, BSF--40 °C Characteristic outer ring frequency, BPF0-120 °C Characteristic inner ring frequency, BPFI-0.44 Hz

k-CN e-0.4 kg Y1-NTN Y2-32.5 kN Y0-20.4 kN

Characteristic inner ring frequency, BPFI-1.4 ra max-97 kN r1a max-11.8 kN d-6,800 rpm B-5,100 rpm

rs min-4.86 Hz r1s min-5.21 Hz Radial clearance class-7.79 Hz Mass (without HJ ring)-71 mm Brand-75 mm

Recommended tightening torque for set screw--20 °C B-120 °C B1-0.42 Hz B2-5.45 Hz C-4.19 Hz