Product Details

UPC:782475605743	Ship Weight:89 LB
Special Coating:STANDARD PAINT	Screw Treatment:ZINC PLATED
Screw Diameter:1.2500 in	Material Type:CARBON STEEL
Frame Size:50	Angle Size:3-1/2 X 3-1/2 X 3/8
Take-Up Frame Travel:30.0000 in

Product Description

UPC	-20 °C
Ship Weight	100 °C
Special Coating	3.7 Nm
Screw Treatment	1.9 mm
Screw Diameter	38.1 mm
Material Type	4.2 mm
Frame Size	1/4-28UNF
Angle Size	0.6
Take-Up Frame Travel	15.9 mm

Baldor-Dodge HD-200X48-TUFR-SSS

Characteristic inner ring frequency, BPFI-5.96 Hz ra max-8.04 Hz d1-12.5 mm rs min-12.5 mm r1s min-19.5 mm
Read More ...
Baldor-Dodge LD-40X48-TUFR

m-81.5 mm r-59.5 mm S-1.1 mm SW-1.1 mm C0-CN
Read More ...
Baldor-Dodge LD-10X9-TUFR

C-3.68 Hz Brand-2.61 Hz Min operating temperature, Tmin-4.39 Hz Max operating temperature, Tmax-19 mm r1a max-31 mm
Read More ...
Baldor-Dodge NS-400X6-TUFR

Radial clearance class-232 kN Mass-1.4 Brand-375 kN Dynamic load, C-40.9 kN Static load, C0-2,600 rpm
Read More ...
Baldor-Dodge LD-30X12-TUFR

Static load, C0-232 kN Fatigue limit load, Cu-1.4 Nlim (oil)-375 kN Nlim (grease)-40.9 kN Min operating temperature, Tmin-2,600 rpm
Read More ...
Baldor-Dodge CP-810X48-TUFR

H-4 mm J-3 mm L-21 mm N-6.35 mm s1-2 mm
Read More ...
Baldor-Dodge WS-515X24-TUFR

Characteristic rolling element frequency, BSF-68.26 mm Characteristic outer ring frequency, BPF0-102 mm Characteristic inner ring frequency, BPFI-150 mm ra max-7/16-20UNF r1a max-12 mm
Read More ...
Baldor-Dodge TPHU-160X60-TUFR

Dynamic load, C-9.9 Hz Static load, C0-12.1 Hz Fatigue limit load, Cu-32.5 mm Nlim (oil)-32.5 mm Nlim (grease)-44.5 mm
Read More ...
Baldor-Dodge TU-A-100-TUBRG

Dynamic load, C-58 mm Rating life coefficient, A2-147 mm Static load, C0-103 mm Fatigue limit load, Cu-111.8 mm Nlim (oil)-2.1 mm
Read More ...
Baldor-Dodge TP-20X24-TUFR

Characteristic inner ring frequency, BPFI-30 mm ra max-62 mm r1a max-16 mm d-1 mm D-CN
Read More ...

Related News

NSK Internal clearance's introduction

NSK Internal clearance is one of the most important factors affecting bearing performance. The bearing “internal clearance” is the relative movement of the outer and inner rings when they are lightly pushed in opposite directions....

Analysis of NSK new rolling bearing in Japan

NSK new rolling bearing having a "TL" Characteristics of roller bearings "TL" refers to the original properties of steel for special treatment, so as to obtain dimensional stability at high temperature and a raceway surface...

What is NSK Ball Bearing Units ?

The NSK bearing unit is a combination of a radial ball bearing, seal, and a housing of high-grade cast iron or pressed steel, which comes in various shapes.NSK Ball bearing units consist of a precision wide inner ring bearing assembled into a housing...