Product Details

UPC:782475942343	Ship Weight:4.6 LB
Shaft Attachment (2):Set Screw	Self Aligning:Self Centering
Ring Size:Standard	Retainer Type:Std Retainer
Retainer Material:Nylon	Max Bearing Speed:5000 rpm
Manufacturing Plant Location:Rogersville, TN	Housing Coating:Powder Coat

Product Description

UPC	55 mm
Ship Weight	59 mm
Shaft Attachment (2)	1.1 mm
Self Aligning	1.1 mm
Ring Size	C3
Retainer Type	0.56 kg
Retainer Material	NTN
Max Bearing Speed	61.5 kN
Manufacturing Plant Location	68 kN
Housing Coating	8.3 kN

Baldor-Dodge NSTU-SC-103-NL

B-232 kN E-1.4 F-375 kN d1-40.9 kN rs min-2,600 rpm
Read More ...
Baldor-Dodge P2B-DLEZ-102-SHCR

m-100 mm r-202.4 mm S-249 mm SW-2.1 mm C0-3
Read More ...
Baldor-Dodge F2B-SC-014-HT

Contact angle α-9.8 kN rs min-5.8 kN r1s min-0.26 kN f0-14.5 Precision class-15,000 rpm
Read More ...
Baldor-Dodge F2B-VSC-106-NL

T min.-15.9 mm T max.-3.18 mm Weight-11.5 kN Recommended tightening torque for set screw--20 °C B-100 °C
Read More ...
Baldor-Dodge P2B-SC-110-FF

B2-NTN C-31.5 kN C1-26.9 kN d-3.3 kN d1-15,000 rpm
Read More ...
Baldor-Dodge F4B-DL-111-NL

Characteristic inner ring frequency, BPFI-8,500 rpm da min--40 °C Da max-120 °C ra max-0.39 Hz d-4.41 Hz
Read More ...
Baldor-Dodge F2B-VSC-104S-NL

Characteristic outer ring frequency, BPF0-2.6 kN Characteristic inner ring frequency, BPFI-15.8 da min-4,700 rpm Da max-4,000 rpm Db min--20 °C
Read More ...
Baldor-Dodge TB-SXR-50M

Characteristic rolling element frequency, BSF-38 mm Characteristic outer ring frequency, BPF0-46 mm Characteristic inner ring frequency, BPFI-72 mm ra max-1.5 mm d1-25 mm
Read More ...
Baldor-Dodge F4B-SC-204-HT

H-0.12 kg J-26 kN L-1.4 N-27.9 kN s1-3.4 kN
Read More ...
Baldor-Dodge F2B-DL-107-NL

Designation of housing-1.5 mm Designation of bearing-1.5 mm A-50.29 mm B-10.67 mm A3-NTN
Read More ...
Baldor-Dodge TB-SC-112

Nlim (oil)-25 kN Nlim (grease)-4,000 rpm Min operating temperature, Tmin-3,400 rpm Max operating temperature, Tmax--40 °C da min-120 °C
Read More ...
Baldor-Dodge F4B-SC-103-HT

Inner ring reference-120 °C Mass-138 mm Cr-145 mm C0r-246 mm Nlim (grease)-239 mm
Read More ...
Baldor-Dodge TB-SXR-115

ra max-108 mm d-90 mm D-120 mm B-42 mm d2-M14
Read More ...

Related News

NSK Internal clearance's introduction

NSK Internal clearance is one of the most important factors affecting bearing performance. The bearing “internal clearance” is the relative movement of the outer and inner rings when they are lightly pushed in opposite directions....

Analysis of NSK new rolling bearing in Japan

NSK new rolling bearing having a "TL" Characteristics of roller bearings "TL" refers to the original properties of steel for special treatment, so as to obtain dimensional stability at high temperature and a raceway surface...

What is NSK Ball Bearing Units ?

The NSK bearing unit is a combination of a radial ball bearing, seal, and a housing of high-grade cast iron or pressed steel, which comes in various shapes.NSK Ball bearing units consist of a precision wide inner ring bearing assembled into a housing...