Product Details

Category:Single Row Ball Bearings	BDI Inventory:25.0
Manufacturer Name:TIMKEN	Minimum Buy Quantity:N/A
Weight / Kilogram:0.145	EAN:0087796086333
Product Group - BDI:B00308	Enclosure:2 Seals
Precision Class:ABEC 1 \| ISO P0

Product Description

Category	1 mm
BDI Inventory	50 mm
Manufacturer Name	90 mm
Minimum Buy Quantity	23 mm
Weight / Kilogram	59.5 mm
EAN	80.7 mm
Product Group - BDI	1.1 mm
Enclosure	3
Precision Class	5.8 mm

TIMKEN GW210PP9

Weight-58.7 mm Recommended tightening torque for set screw-20.6 mm B-30 mm B1-9 mm B2-42.86 mm
Read More ...
TIMKEN 210PP

Characteristic outer ring frequency, BPF0-3 mm Characteristic inner ring frequency, BPFI-140 mm b-300 mm Fw-102 mm Ew-181.7 mm
Read More ...
SKF 6308-2RS1/C3W64

Bearing with/without cage-25.4 mm Radial clearance class-52 mm Precision class-1/4-28UNF Mass-5.5 mm Brand-0.6
Read More ...
SKF 109KSZZG

r1a max-73.5 mm ra max-1 mm Contact angle α-75 mm rs min-55 mm r1s min-59 mm
Read More ...
TIMKEN 9108K

Cage assembly mass-1 Ca-59.2 kN C0a-7.2 kN Nlim (grease)-6,900 rpm Nlim (oil)-12,000 rpm
Read More ...
SKF 317M

r1s min-74.5 mm e-0.6 mm Y2-1 mm Y0-61.9 mm Mass-50 mm
Read More ...
TIMKEN 208PP

Y2-M6x1 Y0-5 mm Mass-0.6 Dynamic load, C-7 mm Rating life coefficient, A2-3 mm
Read More ...
SKF 107KSG

Static load, C0-20.94 mm Fatigue limit load, Cu-56 mm Nref-0.4 Nlim-1.49 Min operating temperature, Tmin-0.82
Read More ...
TIMKEN W206PP

Characteristic rolling element frequency, BSF-10.21 Hz Characteristic outer ring frequency, BPF0-12.79 Hz Characteristic inner ring frequency, BPFI-3.5 mm D-102 mm d1-3.5 mm
Read More ...
TIMKEN W306PP

Characteristic rolling element frequency, BSF-17.5 mm Characteristic outer ring frequency, BPF0-17.5 mm Characteristic inner ring frequency, BPFI-29.5 mm da min-29.5 mm Da max-0.3 mm
Read More ...
SKF 106KSZZST

r1a max-17.5 mm d-20 mm B-5.8 mm d1-34.92 mm e-51.1 mm
Read More ...

Related News

NSK Internal clearance's introduction

NSK Internal clearance is one of the most important factors affecting bearing performance. The bearing “internal clearance” is the relative movement of the outer and inner rings when they are lightly pushed in opposite directions....

Analysis of NSK new rolling bearing in Japan

NSK new rolling bearing having a "TL" Characteristics of roller bearings "TL" refers to the original properties of steel for special treatment, so as to obtain dimensional stability at high temperature and a raceway surface...

What is NSK Ball Bearing Units ?

The NSK bearing unit is a combination of a radial ball bearing, seal, and a housing of high-grade cast iron or pressed steel, which comes in various shapes.NSK Ball bearing units consist of a precision wide inner ring bearing assembled into a housing...