Product Details

Category:Single Row Ball Bearings	BDI Inventory:8.0
Manufacturer Name:SKF	Minimum Buy Quantity:N/A
Weight / Kilogram:0	EAN:7316571589121
Product Group - BDI:B00308	Enclosure:2 Seals
Precision Class:ABEC 1 \| ISO P0

Product Description

Category	0.6
BDI Inventory	8.5 mm
Manufacturer Name	3.97 mm
Minimum Buy Quantity	15.2 kN
Weight / Kilogram	-20 °C
EAN	200 °C
Product Group - BDI	0.38 kg
Enclosure	8 Nm
Precision Class	32 mm

TIMKEN 9100KDD

Nlim (grease)-85 mm Min operating temperature, Tmin-140 mm Max operating temperature, Tmax-41 mm ra max-32 mm r1a max-41 mm
Read More ...
SKF 104KSZZ

Min operating temperature, Tmin-90 mm Max operating temperature, Tmax-122 mm da min-1.5 mm Da max-1.5 mm Db min-75 mm
Read More ...
SKF 6202/15.875-2LS/LT10

da min-0.78 db min-0.81 kg Ce min-NTN Da max-90.5 kN ra max-1.9
Read More ...
SKF 6202-2RSH/GJN

rs min-74.5 mm r1s min-0.6 mm Radial clearance class-1 mm Mass (without HJ ring)-61.9 mm Brand-50 mm
Read More ...
TIMKEN W305PP

Da max-112 kN ra max-13.7 kN d-6,400 rpm D-4,800 rpm B--40 °C
Read More ...
TIMKEN 313K

Max operating temperature, Tmax-107 kN r1a max-13 kN d-6,800 rpm B-5,800 rpm d1--20 °C
Read More ...
TIMKEN W308PP

B-41.5 mm C-27.5 mm C1-38.1 mm d-28.58 mm D-M6x1
Read More ...
SKF 38FF

Y0-1.5 mm Mass-1.1 mm ISO 355 reference-CN Dynamic load, C-1.35 kg Rating life coefficient, A2-NTN
Read More ...
TIMKEN S7PP

Characteristic cage frequency, FTF-37 mm Characteristic rolling element frequency, BSF-68 mm Characteristic outer ring frequency, BPF0-40 ° Characteristic inner ring frequency, BPFI-2.1 mm ra max-1.1 mm
Read More ...
SKF 312MG

SW-96 mm C0-46 mm T min.-15.5 mm T max.-85 mm Weight-180 mm
Read More ...
TIMKEN 205KRP2

Recommended tightening torque for set screw-110 mm B-200 mm B1-53 mm B2-130.1 mm C-178.4 mm
Read More ...
TIMKEN 201K

Precision class-33.4 mm Mass-11 mm Brand-31.85 kN Cr-20.8 kN C0r--20 °C
Read More ...
SKF 6211-2RS1/C3GJN

r1a max-1.5 mm d-40 mm B-29.08 mm d1-59.5 mm e-0.26
Read More ...

Related News

NSK Internal clearance's introduction

NSK Internal clearance is one of the most important factors affecting bearing performance. The bearing “internal clearance” is the relative movement of the outer and inner rings when they are lightly pushed in opposite directions....

Analysis of NSK new rolling bearing in Japan

NSK new rolling bearing having a "TL" Characteristics of roller bearings "TL" refers to the original properties of steel for special treatment, so as to obtain dimensional stability at high temperature and a raceway surface...

What is NSK Ball Bearing Units ?

The NSK bearing unit is a combination of a radial ball bearing, seal, and a housing of high-grade cast iron or pressed steel, which comes in various shapes.NSK Ball bearing units consist of a precision wide inner ring bearing assembled into a housing...