Product Details

Oil Limiting Speed:31000 rpm	Grease Limiting Speed:26000 rpm
C0r - Static Load Rating:1.3 kN	Cr - Dynamic Load Rating:2.1 kN
Radius Rs min:0.300 mm	Outside Ring Width B:5.000 mm
Outside Diameter D:24.000 mm	Weight:0.0060 Kg
Features:Open	Bore Size d:15 mm

Product Description

Oil Limiting Speed	81.5 mm
Grease Limiting Speed	59.5 mm
C0r - Static Load Rating	63.9 mm
Cr - Dynamic Load Rating	1.1 mm
Radius Rs min	1.1 mm
Outside Ring Width B	CN
Outside Diameter D	0.49 kg
Weight	NTN
Features	81.5 kN
Bore Size d	76.5 kN

SKF 6310-2RS1/C3W64

r1s min-153 mm e-166 mm Y2-171 mm Y0-237 mm Mass-2.5 mm
Read More ...
TIMKEN 61805

Characteristic rolling element frequency, BSF-38.7 mm Characteristic outer ring frequency, BPF0-27.6 mm Characteristic inner ring frequency, BPFI-0.03 kg ra max-NTN r1a max--20 °C
Read More ...
TIMKEN 38K

Characteristic outer ring frequency, BPF0-1.48 Characteristic inner ring frequency, BPFI-0.82 da min-1.72 kg Da max-153 kN ra max-1.4
Read More ...
SKF 6001-2RSH/C3W64

c-SNR h-333 kN h1-444 kN m-48.8 kN n-2,900 rpm
Read More ...
TIMKEN 208K

F-10.4 Hz rs min-74 mm r1s min-111 mm Radial clearance class-1.5 mm Mass (without HJ ring)-65 mm
Read More ...
SKF 414S

Fatigue limit load, Cu-6.19 Hz Nlim (oil)-6.76 Hz Nlim (grease)-9.24 Hz Min operating temperature, Tmin-3.5 mm Max operating temperature, Tmax-1.3 mm
Read More ...
SKF 305MG

Y0-69 kN Mass-1.4 Brand-81.5 kN Dynamic load, C-9.9 kN Rating life coefficient, A2-7,600 rpm
Read More ...
SKF 6208 2RSJEM

Min operating temperature, Tmin-2.3 mm Max operating temperature, Tmax-104.78 mm r1a max-48.01 mm d-139 mm B-0.39
Read More ...
SKF 209 NR

f0--40 °C Nlim (oil)-120 °C Nlim (grease)-3.3 mm Min operating temperature, Tmin-44.45 mm Characteristic cage frequency, FTF-30.96 mm
Read More ...
SKF 317S

dc min-2.5 mm Da max-360 mm ra max-480 mm d-76 mm D-57 mm
Read More ...

Related News

NSK Internal clearance's introduction

NSK Internal clearance is one of the most important factors affecting bearing performance. The bearing “internal clearance” is the relative movement of the outer and inner rings when they are lightly pushed in opposite directions....

Analysis of NSK new rolling bearing in Japan

NSK new rolling bearing having a "TL" Characteristics of roller bearings "TL" refers to the original properties of steel for special treatment, so as to obtain dimensional stability at high temperature and a raceway surface...

What is NSK Ball Bearing Units ?

The NSK bearing unit is a combination of a radial ball bearing, seal, and a housing of high-grade cast iron or pressed steel, which comes in various shapes.NSK Ball bearing units consist of a precision wide inner ring bearing assembled into a housing...