Product Details

Oil Limiting Speed:56000 rpm	Grease Limiting Speed:48000 rpm
C0r - Static Load Rating:0.51 kN	Cr - Dynamic Load Rating:1.3 kN
Radius Rs min:0.200 mm	Outside Ring Width B:5.000 mm
Outside Diameter D:14.0000 mm	Weight:0.0030 Kg
Features:Contact Seals	Bore Size d:5 mm

Product Description

Oil Limiting Speed	17.9 kN
Grease Limiting Speed	6,100 rpm
C0r - Static Load Rating	8,200 rpm
Cr - Dynamic Load Rating	-40 °C
Radius Rs min	200 °C
Outside Ring Width B	0.42 Hz
Outside Diameter D	6.29 Hz
Weight	7.62 Hz
Features	10.38 Hz
Bore Size d	64 mm

SKF RW207-CCRA

Characteristic cage frequency, FTF-145 mm Characteristic rolling element frequency, BSF-277 mm Characteristic outer ring frequency, BPF0-2.5 mm Characteristic inner ring frequency, BPFI-110 mm da min-240 mm
Read More ...
TIMKEN W308PP

Characteristic outer ring frequency, BPF0-1 mm Characteristic inner ring frequency, BPFI-90 mm da min-66 mm da max-1.5 mm db min-1.1 mm
Read More ...
TIMKEN 207KDD

D1-145 mm rs min-277 mm r1s min-2.5 mm Radial clearance class-110 mm Mass (without HJ ring)-240 mm
Read More ...
TIMKEN 206KRR8

Characteristic cage frequency, FTF-200 °C Characteristic rolling element frequency, BSF-0.44 Hz Characteristic outer ring frequency, BPF0-8.89 Hz Characteristic inner ring frequency, BPFI-11.12 Hz d-13.88 Hz
Read More ...
SKF 206SZZ

E-3.5 mm G-3.3 mm H-63 mm H1-0.33 H2-1.79
Read More ...
TIMKEN 307PP

Recommended tightening torque for set screw-55.6 mm B-73 mm C-22.2 mm d-34 mm D-10.6 mm
Read More ...
TIMKEN 214K

Mass (without HJ ring)-284 mm Dynamic load, C-3 mm Static load, C0-277 mm Fatigue limit load, Cu-193 mm Nlim (oil)-4 mm
Read More ...
SKF R10ZZ

r1a max--20 °C D-120 °C C-0.43 Hz Brand-6.86 Hz Min operating temperature, Tmin-6.43 Hz
Read More ...
SKF 305SG

Characteristic cage frequency, FTF-8.68 Hz Characteristic rolling element frequency, BSF-11.32 Hz Characteristic outer ring frequency, BPF0-35 mm Characteristic inner ring frequency, BPFI-35.5 mm da min-49.5 mm
Read More ...
SKF 201SZZG

B-7.78 Hz E-10.22 Hz F-3.5 mm D1-64 mm rs min-0.55
Read More ...

Related News

NSK Internal clearance's introduction

NSK Internal clearance is one of the most important factors affecting bearing performance. The bearing “internal clearance” is the relative movement of the outer and inner rings when they are lightly pushed in opposite directions....

Analysis of NSK new rolling bearing in Japan

NSK new rolling bearing having a "TL" Characteristics of roller bearings "TL" refers to the original properties of steel for special treatment, so as to obtain dimensional stability at high temperature and a raceway surface...

What is NSK Ball Bearing Units ?

The NSK bearing unit is a combination of a radial ball bearing, seal, and a housing of high-grade cast iron or pressed steel, which comes in various shapes.NSK Ball bearing units consist of a precision wide inner ring bearing assembled into a housing...