Product Details

Oil Reference Speed:6200 rpm	Grease Reference Speed:4400 rpm
C0r - Static Load Rating:140.2 kN	Cr - Dynamic Load Rating:173 kN
Radius Rs min:3.000 mm	Outside Ring Width B:47.000 mm
Outside Diameter D:215.000 mm	Weight:6.980 Kg
Features:Open	Bore Size d:100 mm

Product Description

Oil Reference Speed	19.58 mm
Grease Reference Speed	51 mm
C0r - Static Load Rating	0.38
Cr - Dynamic Load Rating	1.57
Radius Rs min	0.86
Outside Ring Width B	NTN
Outside Diameter D	48.5 kN
Weight	1.4
Features	58 kN
Bore Size d	7.1 kN

SKF R8ZZST

a-0.36 rs min-7 r1s min-1.14 kN e-419 N/µm Y2-882 N/µm
Read More ...
TIMKEN S7K

Characteristic rolling element frequency, BSF-3.18 mm Characteristic outer ring frequency, BPF0-11.5 kN Characteristic inner ring frequency, BPFI--20 °C da min-100 °C Da max-0.34 kg
Read More ...
TIMKEN W209PPB4

Fatigue limit load, Cu-19.2 kN Nlim (oil)--20 °C Nlim (grease)-100 °C Min operating temperature, Tmin-0.8 kg Max operating temperature, Tmax-8 Nm
Read More ...
TIMKEN 204K

r1s min-0.13 kN Radial clearance class-12.7 Mass (without HJ ring)-16,700 rpm Dynamic load, C--20 °C Static load, C0-80 °C
Read More ...
TIMKEN 204RR8

Characteristic inner ring frequency, BPFI-1.2 kg b-NTN Fw-84 kN Ew-94.5 kN Bc-11.5 kN
Read More ...
TIMKEN 9105PP

Fatigue limit load, Cu-7.3 Hz Nlim (oil)-8.26 Hz Nlim (grease)-10.74 Hz Min operating temperature, Tmin-3.5 mm Max operating temperature, Tmax-0.8 mm
Read More ...
SKF 6207 2RSNRJEM

da max-48.7 kN Da max-5.9 kN ra max-8,300 rpm d-12,000 rpm D--20 °C
Read More ...
SKF 101KSZZ

Recommended tightening torque for set screw-32.4 mm B-47 mm B1-M6x1 B2-5 mm C-0.6
Read More ...
TIMKEN W209PP

Mass-22 mm ISO 355 reference-4.76 mm Dynamic load, C-31.8 kN Rating life coefficient, A2--40 °C Static load, C0-100 °C
Read More ...
TIMKEN 309K

Static load, C0-180 mm Nlim (oil)-46 mm Nlim (grease)-118.2 mm Min operating temperature, Tmin-160.8 mm Max operating temperature, Tmax-2.1 mm
Read More ...
SKF R18FF

ra max-8 Nm r1a max-1.9 mm d-17.5 mm D-55.6 mm B-M8x1
Read More ...
SKF 6004 RSJEM

Nref-13.9 Nlim-8,900 rpm Min operating temperature, Tmin--25 °C Max operating temperature, Tmax-110 °C Characteristic cage frequency, FTF-0.4 Hz
Read More ...
TIMKEN 9120NPP E9243

Min operating temperature, Tmin-19.8 mm Max operating temperature, Tmax-1.5 mm da min-1.5 mm da max-0.41 db min-1.48
Read More ...
TIMKEN 305KDDG

Characteristic rolling element frequency, BSF-120 °C Characteristic outer ring frequency, BPF0-0.43 Hz Characteristic inner ring frequency, BPFI-6.67 Hz da min-7.76 Hz Da max-10.24 Hz
Read More ...

Related News

NSK Internal clearance's introduction

NSK Internal clearance is one of the most important factors affecting bearing performance. The bearing “internal clearance” is the relative movement of the outer and inner rings when they are lightly pushed in opposite directions....

Analysis of NSK new rolling bearing in Japan

NSK new rolling bearing having a "TL" Characteristics of roller bearings "TL" refers to the original properties of steel for special treatment, so as to obtain dimensional stability at high temperature and a raceway surface...

What is NSK Ball Bearing Units ?

The NSK bearing unit is a combination of a radial ball bearing, seal, and a housing of high-grade cast iron or pressed steel, which comes in various shapes.NSK Ball bearing units consist of a precision wide inner ring bearing assembled into a housing...