Product Details

Category:Miniature Precision Ball Bearings	BDI Inventory:0.0
Manufacturer Name:SKF	Minimum Buy Quantity:N/A
Weight / Kilogram:0.03	Product Group - BDI:B04270
Enclosure:Open	Precision Class:ABEC 7 \| ISO P4
Flanges:No

Product Description

Category	68.5 mm
BDI Inventory	85 mm
Manufacturer Name	86.5 mm
Minimum Buy Quantity	90 mm
Weight / Kilogram	5 mm
Product Group - BDI	6 mm
Enclosure	1.5 mm
Precision Class	1.5 mm
Flanges	65 mm

TIMKEN 2MM9300WI QUL

Characteristic rolling element frequency, BSF-52 mm Characteristic outer ring frequency, BPF0-78 mm Characteristic inner ring frequency, BPFI-78 mm D-0.6 mm d1-1 mm
Read More ...
TIMKEN 2MM9300WI TUH

Static load, C0-176 mm Fatigue limit load, Cu-179 mm f0-6 mm Nlim (grease)-16.5 mm Min operating temperature, Tmin-3 mm
Read More ...
TIMKEN 2MM200WI SUM

T min.-1.5 mm T max.-C3 Weight-1.06 kg Recommended tightening torque for set screw-NTN B-75.5 kN
Read More ...
TIMKEN 2MM200WI QUM

ra max-1.79 r1a max-0.99 d-NTN D-76 kN B-1.4
Read More ...
TIMKEN 2MMC200WI QUM

D-169 kN G-152 kN m-13.7 kN r-5,800 rpm S-7,400 rpm
Read More ...
TIMKEN 2MMC9100WI SUL

Axial displacement K Factor-3.6 mm Preload level-17.46 mm Preload value-27.2 mm Axial rigidity-40 mm Radial rigidity-1/4-28UNF
Read More ...
TIMKEN 3MMV9100HX SUM

C0-54 mm T min.-82 mm T max.-1.5 mm Weight-40 mm Recommended tightening torque for set screw-90 mm
Read More ...
TIMKEN 3MM9300WI SUL

Dynamic load, C-8,500 rpm Static load, C0--20 °C Fatigue limit load, Cu-120 °C Nref-32 mm Nlim-0.3 mm
Read More ...
TIMKEN 2MM9100WI QUM

Brand-120 °C Dynamic load, C-63 mm Static load, C0-93.5 mm Fatigue limit load, Cu-90 mm Nlim (oil)-87 mm
Read More ...
TIMKEN 3MMV9100HXVVSULFS637

E--20 °C F-120 °C d1-0.5 Hz rs min-10.52 Hz r1s min-10 Hz
Read More ...
SKF 709 CD/P4ADGB

Characteristic rolling element frequency, BSF-6.06 Hz Characteristic outer ring frequency, BPF0-7.94 Hz Characteristic inner ring frequency, BPFI-55 mm ra max-75 mm d1-1 mm
Read More ...

Related News

NSK Internal clearance's introduction

NSK Internal clearance is one of the most important factors affecting bearing performance. The bearing “internal clearance” is the relative movement of the outer and inner rings when they are lightly pushed in opposite directions....

Analysis of NSK new rolling bearing in Japan

NSK new rolling bearing having a "TL" Characteristics of roller bearings "TL" refers to the original properties of steel for special treatment, so as to obtain dimensional stability at high temperature and a raceway surface...

What is NSK Ball Bearing Units ?

The NSK bearing unit is a combination of a radial ball bearing, seal, and a housing of high-grade cast iron or pressed steel, which comes in various shapes.NSK Ball bearing units consist of a precision wide inner ring bearing assembled into a housing...