Product Details

Category:Miniature Precision Ball Bearings	BDI Inventory:0.0
Manufacturer Name:SKF	Minimum Buy Quantity:N/A
Weight / Kilogram:0.015	EAN:7316574345861
Product Group - BDI:B04270	Enclosure:Open
Precision Class:ABEC 7 \| ISO P4

Product Description

Category	0.13 kg
BDI Inventory	NTN
Manufacturer Name	14 kN
Minimum Buy Quantity	7.85 kN
Weight / Kilogram	0.36 kN
EAN	13.9
Product Group - BDI	13,000 rpm
Enclosure	-20 °C
Precision Class	120 °C

NSK 7200A5TRDULP4Y

C3-8.12 Hz Dw-0.8 mm Lw-1.5 mm Lubrication hole on outer ring-57.15 mm Inner ring reference-14.73 mm
Read More ...
TIMKEN 2MM9300WI TUL

Radial clearance class-0.4 Hz Mass-4.71 Hz Brand-5.6 Hz Dynamic load, C-8.4 Hz Static load, C0-38 mm
Read More ...
SKF 7000 ACD/P4ADGBVT105

Dynamic load, C-26.9 mm Rating life coefficient, A2-28.84 mm Static load, C0-8 mm Fatigue limit load, Cu-15 ° Nlim (oil)-0.3 mm
Read More ...
TIMKEN 3MMV9300WI SUL

B-4,500 rpm B1-3,300 rpm B2--40 °C C-120 °C C1-0.44 Hz
Read More ...
TIMKEN 2MMC9100WI QUM

d1-0.36 rs min-1.67 r1s min-0.92 e-NTN Y2-226 kN
Read More ...
SKF 709 CD/P4ADGB

E-83.11 mm F-26 mm d1-25 ° rs min-1.1 mm r1s min-1 mm
Read More ...
TIMKEN 3MMV200WI DUM

Characteristic rolling element frequency, BSF-1.2 Characteristic outer ring frequency, BPF0-19 mm Characteristic inner ring frequency, BPFI-4.76 mm da min-23.2 kN db min--20 °C
Read More ...
TIMKEN 3MM9100WI SUL

Characteristic inner ring frequency, BPFI-0.4 mm da min-46.3 mm da max-R42 db min-CN Da max-0.07 kg
Read More ...
SKF 708 ACD/P4ADBB

B-0.59 E-1.02 F-0.56 d1-0.25 kg rs min-40 kN
Read More ...
TIMKEN 2MM9100WI QUH

Recommended tightening torque for set screw-0.03 kg B-15.9 kN B1-24 kN B2-6,500 rpm C--20 °C
Read More ...
NTN CH7200CG1DUJ74

B-13 mm d1-420 mm e-80 mm Y2-28 mm Y0-45 mm
Read More ...
TIMKEN 2MM9300WI TUM

Fatigue limit load, Cu-0.8 mm f0-1.5 mm Nlim-92.08 mm Min operating temperature, Tmin-16.67 mm Max operating temperature, Tmax-NTN
Read More ...
NTN 7000CVDUJ84

Fatigue limit load, Cu-163 mm Nlim (oil)-49 mm Nlim (grease)-14mm Min operating temperature, Tmin-21 mm Max operating temperature, Tmax-16 mm
Read More ...

Related News

NSK Internal clearance's introduction

NSK Internal clearance is one of the most important factors affecting bearing performance. The bearing “internal clearance” is the relative movement of the outer and inner rings when they are lightly pushed in opposite directions....

Analysis of NSK new rolling bearing in Japan

NSK new rolling bearing having a "TL" Characteristics of roller bearings "TL" refers to the original properties of steel for special treatment, so as to obtain dimensional stability at high temperature and a raceway surface...

What is NSK Ball Bearing Units ?

The NSK bearing unit is a combination of a radial ball bearing, seal, and a housing of high-grade cast iron or pressed steel, which comes in various shapes.NSK Ball bearing units consist of a precision wide inner ring bearing assembled into a housing...