Product Details

Category:Angular Contact Ball Bearings	BDI Inventory:3.0
Manufacturer Name:NSK	Minimum Buy Quantity:N/A
Weight / Kilogram:0.82	EAN:0029176018879
Product Group - BDI:B00308	Enclosure:Open
Flush Ground:Yes

Product Description

Category	19 mm
BDI Inventory	21.3 mm
Manufacturer Name	33 mm
Minimum Buy Quantity	0.3 mm
Weight / Kilogram	17 mm
EAN	35 mm
Product Group - BDI	10 mm
Enclosure	22.8 mm
Flush Ground	31.4 mm

SKF 5308CZZ

T min.-0.99 T max.-7.06 kg Weight-NTN Recommended tightening torque for set screw-445 kN Designation of housing-1
Read More ...
SKF 5208MF

r1s min-169 kN Radial clearance class-20.6 kN Mass (without HJ ring)-4,700 rpm Brand-3,500 rpm Dynamic load, C--40 °C
Read More ...
NACHI 5217ZZ

Characteristic rolling element frequency, BSF--40 °C Characteristic outer ring frequency, BPF0-120 °C Characteristic inner ring frequency, BPFI-86 mm da min-106 mm db min-149 mm
Read More ...
TIMKEN 7207WN

Fatigue limit load, Cu-80 mm f0-31 mm Nlim (grease)-70.2 mm Min operating temperature, Tmin-46.2 mm Max operating temperature, Tmax-66.6 mm
Read More ...
SKF 5204CFF

Fatigue limit load, Cu-17,000 rpm Nlim (oil)--20 °C Nlim (grease)-120 °C Min operating temperature, Tmin-0.38 Hz Max operating temperature, Tmax-3.81 Hz
Read More ...
NACHI 7312 BMU C3

Da max-1.1 mm ra max-CN d-0.18 kg D-61.5 kN B-68 kN
Read More ...
SKF 7308PJDU

Min operating temperature, Tmin-9.5 kN Max operating temperature, Tmax-7.2 kN Characteristic cage frequency, FTF-0.41 kN Characteristic rolling element frequency, BSF-29,000 rpm Characteristic outer ring frequency, BPF0-20,000 rpm
Read More ...
SKF 3206 A-2RS1

Dynamic load, C-SCOE207-35 Static load, C0-48 mm Fatigue limit load, Cu-27 mm Nref-37.6 mm Nlim-51.1 mm
Read More ...
SKF 3304 A-2RS1

ras max-0.22 kg d-NTN D-20.7 kN B-11.6 kN C-0.53 kN
Read More ...
SKF 97313U2-BRZ

Radial clearance class-2.5 mm Mass (without HJ ring)-160 mm Brand-290 mm Dynamic load, C-80 mm Static load, C0-67 mm
Read More ...
NSK 7216BMPC

N1-47.62 mm s1-67.2 mm S-90 mm Z-5/16-24UNF C-6.5 mm
Read More ...

Related News

NSK Internal clearance's introduction

NSK Internal clearance is one of the most important factors affecting bearing performance. The bearing “internal clearance” is the relative movement of the outer and inner rings when they are lightly pushed in opposite directions....

Analysis of NSK new rolling bearing in Japan

NSK new rolling bearing having a "TL" Characteristics of roller bearings "TL" refers to the original properties of steel for special treatment, so as to obtain dimensional stability at high temperature and a raceway surface...

What is NSK Ball Bearing Units ?

The NSK bearing unit is a combination of a radial ball bearing, seal, and a housing of high-grade cast iron or pressed steel, which comes in various shapes.NSK Ball bearing units consist of a precision wide inner ring bearing assembled into a housing...