Product Details

Category:Angular Contact Ball Bearings	BDI Inventory:2.0
Manufacturer Name:SKF	Minimum Buy Quantity:N/A
Weight / Kilogram:0.055	EAN:0097741010726
Product Group - BDI:B00152	Enclosure:Open
Flush Ground:No

Product Description

Category	5.85 Hz
BDI Inventory	8.15 Hz
Manufacturer Name	0.8 mm
Minimum Buy Quantity	13.9 mm
Weight / Kilogram	0.8 mm
EAN	1.5 mm
Product Group - BDI	0.33
Enclosure	1.82
Flush Ground	1

NACHI 7312 BMU C3

Dynamic load, C-7,500 rpm Static load, C0--40 °C Fatigue limit load, Cu-120 °C Nref-0.42 Hz Nlim-6.31 Hz
Read More ...
SKF 5306CFF

Fatigue limit load, Cu-51.1 mm Nref-72 mm Nlim-5/16-24UNF Min operating temperature, Tmin-6.5 mm Max operating temperature, Tmax-1.1
Read More ...
FAG BEARING 7236-B-MP-UA

db min-0.42 Hz Da max-6.07 Hz Db min-6.72 Hz Ca min-9.28 Hz Cb min-73 mm
Read More ...
FAG BEARING 3308-BD-2Z

Recommended tightening torque for set screw-113 kN B-13.8 kN C-6,900 rpm C1-5,900 rpm d--20 °C
Read More ...
NACHI 7306BMU C3

b-11.5 Nm k-14.5 mm Associated sleeve reference-1 mm e-1 mm Y1-0.37
Read More ...
SKF 3313 DNRCBM

Max operating temperature, Tmax-1.03 Characteristic cage frequency, FTF-NTN Characteristic rolling element frequency, BSF-76.5 kN Characteristic outer ring frequency, BPF0-1.4 Characteristic inner ring frequency, BPFI-90.5 kN
Read More ...
TIMKEN 7317WNSU

Characteristic outer ring frequency, BPF0-1.78 Characteristic inner ring frequency, BPFI-0.98 db-1.85 kg Da max-NTN Db-187 kN
Read More ...
TIMKEN 7308WN SU

E-5.58 Hz F-7.42 Hz d1-61.5 mm rs min-83.5 mm r1s min-1 mm
Read More ...
TIMKEN 5211WD

Weight-144 mm Recommended tightening torque for set screw-189 mm B-2 mm B1-110 mm B2-200 mm
Read More ...
BEARINGS LIMITED 5302 ZZ/C3

D1-20 mm rs min-25.25 mm r1s min-42.5 mm Radial clearance class-16 mm Mass (without HJ ring)-1.5 mm
Read More ...
TIMKEN 5406WBR

da min-265 kN db min-29.2 kN Ce min-4,300 rpm Da max-3,700 rpm ra max--40 °C
Read More ...

Related News

NSK Internal clearance's introduction

NSK Internal clearance is one of the most important factors affecting bearing performance. The bearing “internal clearance” is the relative movement of the outer and inner rings when they are lightly pushed in opposite directions....

Analysis of NSK new rolling bearing in Japan

NSK new rolling bearing having a "TL" Characteristics of roller bearings "TL" refers to the original properties of steel for special treatment, so as to obtain dimensional stability at high temperature and a raceway surface...

What is NSK Ball Bearing Units ?

The NSK bearing unit is a combination of a radial ball bearing, seal, and a housing of high-grade cast iron or pressed steel, which comes in various shapes.NSK Ball bearing units consist of a precision wide inner ring bearing assembled into a housing...