Product Details

Category:Angular Contact Ball Bearings	BDI Inventory:3.0
Manufacturer Name:SKF	Minimum Buy Quantity:N/A
Weight / Kilogram:4.643	EAN:0097741015684
Product Group - BDI:B00152	Enclosure:2 Metal Shields
Flush Ground:No

Product Description

Category	0.43 Hz
BDI Inventory	6.63 Hz
Manufacturer Name	8.58 Hz
Minimum Buy Quantity	11.42 Hz
Weight / Kilogram	102 mm
EAN	102 mm
Product Group - BDI	138 mm
Enclosure	150 mm
Flush Ground	152 mm

SKF 3209 A/C3

Characteristic cage frequency, FTF-147 mm Characteristic rolling element frequency, BSF-103 mm Characteristic outer ring frequency, BPF0-2.1 mm Characteristic inner ring frequency, BPFI-2.1 mm da min-CN
Read More ...
SKF 5212MG

Max operating temperature, Tmax-0.02 kg Characteristic cage frequency, FTF-NTN Characteristic rolling element frequency, BSF-14.7 kN Characteristic outer ring frequency, BPF0-22.9 kN Characteristic inner ring frequency, BPFI-8,500 rpm
Read More ...
SKF 5206MFF

Characteristic inner ring frequency, BPFI-12 mm da min-3.6 mm Da max-12 mm ra max-40 mm d-M5x0,8
Read More ...
SKF 8222

G-74 mm G1-76.5 mm B3-80 mm C1-3 mm n-4.5 mm
Read More ...
BEARINGS LIMITED 5305-ZZ/C3 PRX

T-10.19 Hz d1-12.81 Hz a-6.8 mm e-3.3 mm Y2-73.02 mm
Read More ...
NACHI 5306ZZ

r1a max-6.94 Hz d-7.76 Hz B-10.24 Hz d1-3.5 mm e-0.8 mm
Read More ...
SKF 7306PDU-BRZ

ra max-1.41 d-0.77 D-0.39 kg B-57.5 kN E-1.4
Read More ...
SKF 3310 ENR/C3

Brand-5,700 rpm Dynamic load, C-7,500 rpm Static load, C0--40 °C Fatigue limit load, Cu-200 °C Nref-0.42 Hz
Read More ...
SKF 3203 ATN9

k-2.95 Associated sleeve reference-4.4 e-2.89 Y1-CN Y2-4.32 kg
Read More ...
BEARINGS LIMITED 907257 2RS

Recommended tightening torque for set screw-6.19 Hz Designation of housing-6.76 Hz Designation of bearing-9.24 Hz A-3.5 mm A1-1.3 mm
Read More ...
NTN W5206LLU

S-NTN SW-405 kN C0-1.4 T min.-560 kN T max.-59 kN
Read More ...

Related News

NSK Internal clearance's introduction

NSK Internal clearance is one of the most important factors affecting bearing performance. The bearing “internal clearance” is the relative movement of the outer and inner rings when they are lightly pushed in opposite directions....

Analysis of NSK new rolling bearing in Japan

NSK new rolling bearing having a "TL" Characteristics of roller bearings "TL" refers to the original properties of steel for special treatment, so as to obtain dimensional stability at high temperature and a raceway surface...

What is NSK Ball Bearing Units ?

The NSK bearing unit is a combination of a radial ball bearing, seal, and a housing of high-grade cast iron or pressed steel, which comes in various shapes.NSK Ball bearing units consist of a precision wide inner ring bearing assembled into a housing...