Product Details

Bore Type:Cylindrical Bore	Enclosure:Double Seal
Configuration:Single Row	Weight:0.011 kg
Bore Size:12 mm	Outside Diameter:24 mm
Width:6 mm	Fillet Radius/Chamfer:0.3 mm
Dynamic Load Rating:2,700 N	Static Load Rating:1,320 N

Product Description

Bore Type	3.5 mm
Enclosure	73.4 mm
Configuration	22.02 mm
Weight	0.29
Bore Size	2.1
Outside Diameter	1.16
Width	1.23 kg
Fillet Radius/Chamfer	135 kN
Dynamic Load Rating	1.4
Static Load Rating	165 kN

NACHI 6308-2NSE9C3

L3-0.25 N-2.69 N1-4 N2-2.63 P-C3
Read More ...
NACHI 6902-2NSE9

Fatigue limit load, Cu-5.77 Hz Nlim (oil)-5.85 Hz Nlim (grease)-8.15 Hz Min operating temperature, Tmin-0.8 mm Max operating temperature, Tmax-13.9 mm
Read More ...
Timken 100BIC439

Characteristic inner ring frequency, BPFI-120 °C da min-0.44 Hz Da max-7.32 Hz ra max-8.27 Hz d-10.73 Hz
Read More ...
NACHI 6011-2NSEC3

Characteristic rolling element frequency, BSF-3.3 mm Characteristic outer ring frequency, BPF0-127 mm Characteristic inner ring frequency, BPFI-49.43 mm ra max-180 mm d1-0.74
Read More ...
333333 444444

Mass-0.8 kg Brand-8 Nm Dynamic load, C-43.5 mm Static load, C0-20 mm Fatigue limit load, Cu-6.5 mm
Read More ...
NACHI 62/22-2NSE9C3

T min.-7.23 Hz T max.-6.91 Hz Weight-9.09 Hz Recommended tightening torque for set screw-94 mm Designation of housing-99 mm
Read More ...
NACHI 6802-2NSE9C3

Fatigue limit load, Cu-7.16 Hz Nlim (oil)-9.09 Hz Nlim (grease)-11.91 Hz Min operating temperature, Tmin-237 mm Max operating temperature, Tmax-353 mm
Read More ...
NACHI 6906-2NSE9C3

ISO 355 reference-95.9 mm Brand-1.1 mm Dynamic load, C-1 mm Rating life coefficient, A2-C4 Static load, C0-0.91 kg
Read More ...
NACHI 6904-2NSE9C3

Static load, C0--30 °C Fatigue limit load, Cu-120 °C Nlim (oil)-0.37 Hz Nlim (grease)-3.35 Hz Min operating temperature, Tmin-3.66 Hz
Read More ...
NACHI 6909-2NSE9C3

Y0-0.4 Hz Mass-4.77 Hz Dynamic load, C-5.62 Hz Rating life coefficient, A2-8.38 Hz Static load, C0-72 mm
Read More ...
NACHI 6204-2NSE9C3

Fatigue limit load, Cu-22 Nm Nlim (oil)-33.4 mm Nlim (grease)-49.3 mm Min operating temperature, Tmin-22.3 mm Max operating temperature, Tmax-24 mm
Read More ...

Related News

NSK Internal clearance's introduction

NSK Internal clearance is one of the most important factors affecting bearing performance. The bearing “internal clearance” is the relative movement of the outer and inner rings when they are lightly pushed in opposite directions....

Analysis of NSK new rolling bearing in Japan

NSK new rolling bearing having a "TL" Characteristics of roller bearings "TL" refers to the original properties of steel for special treatment, so as to obtain dimensional stability at high temperature and a raceway surface...

What is NSK Ball Bearing Units ?

The NSK bearing unit is a combination of a radial ball bearing, seal, and a housing of high-grade cast iron or pressed steel, which comes in various shapes.NSK Ball bearing units consist of a precision wide inner ring bearing assembled into a housing...