Product Details

Category:Precision Ball Bearings	BDI Inventory:4.0
Manufacturer Name:NTN	Minimum Buy Quantity:N/A
Weight / Kilogram:0.106	EAN:4547359561746
Product Group - BDI:B04270	Enclosure:2 Seals
Precision Class:ABEC 5 \| ISO P5

Product Description

Category	NTN
BDI Inventory	206 kN
Manufacturer Name	1.4
Minimum Buy Quantity	295 kN
Weight / Kilogram	34.5 kN
EAN	3,300 rpm
Product Group - BDI	2,500 rpm
Enclosure	-40 °C
Precision Class	120 °C

TIMKEN 3MMVC9312HX SUM

Brand-40 mm Dynamic load, C-22 mm Rating life coefficient, A2-31 mm Static load, C0-12 mm Fatigue limit load, Cu-13 mm
Read More ...
NTN 71906HVUJ74

Dynamic load, C-7.19 Hz Rating life coefficient, A2-9.81 Hz Static load, C0-29.99 mm Fatigue limit load, Cu-37.2 mm Nlim (oil)-1 mm
Read More ...
SKF 309RDS-BKE 7

Lubrication hole on outer ring-14.76 Hz Precision class-83 mm Mass-83.5 mm Cr-103 mm Ca-106.5 mm
Read More ...
NACHI 7210CYDUP4

Characteristic outer ring frequency, BPF0-2,900 rpm Characteristic inner ring frequency, BPFI--40 °C ra max-120 °C r1a max-0.45 Hz d-9.37 Hz
Read More ...
TIMKEN 2MM9107WI

Characteristic outer ring frequency, BPF0-3.5 mm Characteristic inner ring frequency, BPFI-155.5 mm da min-0.31 da max-1.97 Da max-1.08
Read More ...
NTN HTA022UT2DB+10D2 01

Fatigue limit load, Cu-10.23 Hz Nlim (oil)-10 Hz Nlim (grease)-10 Hz Min operating temperature, Tmin-70 mm Max operating temperature, Tmax-125 mm
Read More ...
SKF 1913RDS-BKE 7

Nlim (oil)-8.12 Hz Nlim (grease)-0.8 mm Min operating temperature, Tmin-1.5 mm Max operating temperature, Tmax-57.15 mm Characteristic cage frequency, FTF-14.73 mm
Read More ...
NSK 7205CTYNDULP4

Dynamic load, C-18.94 Hz Static load, C0-22.06 Hz Fatigue limit load, Cu-80 mm Nlim (oil)-30 mm Nlim (grease)-35 mm
Read More ...
TIMKEN 2MM9107WI SUH

B-140 mm E-210 mm F-69 mm d1-152.9 mm D1-188.2 mm
Read More ...
SKF 7128KRDS-BKE 7

Characteristic inner ring frequency, BPFI--40 °C ra max-120 °C r1a max-0.43 Hz D-6.9 Hz C-6.86 Hz
Read More ...

Related News

NSK Internal clearance's introduction

NSK Internal clearance is one of the most important factors affecting bearing performance. The bearing “internal clearance” is the relative movement of the outer and inner rings when they are lightly pushed in opposite directions....

Analysis of NSK new rolling bearing in Japan

NSK new rolling bearing having a "TL" Characteristics of roller bearings "TL" refers to the original properties of steel for special treatment, so as to obtain dimensional stability at high temperature and a raceway surface...

What is NSK Ball Bearing Units ?

The NSK bearing unit is a combination of a radial ball bearing, seal, and a housing of high-grade cast iron or pressed steel, which comes in various shapes.NSK Ball bearing units consist of a precision wide inner ring bearing assembled into a housing...