Product Details

Category:Miniature Precision Ball Bearings	BDI Inventory:0.0
Manufacturer Name:SCHAEFFLER GROUP	Minimum Buy Quantity:N/A
Weight / Kilogram:0.04	Product Group - BDI:B00308
Enclosure:1 Seal	Precision Class:ABEC 7 \| ISO P4
Flanges:No

Product Description

Category	8 Nm
BDI Inventory	43.5 mm
Manufacturer Name	20 mm
Minimum Buy Quantity	6.5 mm
Weight / Kilogram	49.21 mm
Product Group - BDI	90 mm
Enclosure	5/16-24UNF
Precision Class	9.2 mm
Flanges	1.1

TIMKEN 3MM9300WI QUM

s1--40 °C S-120 °C C-0.42 Hz C0-6.31 Hz T min.-7.23 Hz
Read More ...
TIMKEN 2MMC9300WI DUM

Associated sleeve reference-16.14 Hz e-54.5 mm Y1-54.5 mm Y2-67.5 mm Y0-67.5 mm
Read More ...
SKF 708 CDGA/P4A

Characteristic rolling element frequency, BSF-3 Characteristic outer ring frequency, BPF0-20.6 mm Characteristic inner ring frequency, BPFI-11 mm da min-H3144 dc min-0.25
Read More ...
SKF 71900 ACD/P4ATBTB

Preload value-223 kN Axial rigidity-262 kN Radial rigidity-31.1 kN Min operating temperature, Tmin-4,400 rpm Max operating temperature, Tmax-3,800 rpm
Read More ...
NTN 7200CG1UJ74

T min.-0.38 Hz T max.-4.12 Hz Weight-3.08 Hz B-4.92 Hz B1-25 mm
Read More ...
TIMKEN 3MM9300WI SUL

Fatigue limit load, Cu-0.42 Hz f0-6.18 Hz Nlim (grease)-7.6 Hz Min operating temperature, Tmin-10.4 Hz Max operating temperature, Tmax-164 mm
Read More ...
NTN 695ZZCNMPS5

Dynamic load, C--20 °C Static load, C0-100 °C Fatigue limit load, Cu-2.58 kg Nlim (oil)-16.8 Nm Nlim (grease)-68.2 mm
Read More ...
TIMKEN 3MMV9100HX DUM

Weight-7.2 Hz Recommended tightening torque for set screw-9.8 Hz B-0.8 mm C-1.3 mm C1-26.99 mm
Read More ...
TIMKEN 3MMC9300WI QUM

C-1.4 C1-340 kN d-38.1 kN D-2,800 rpm G-2,100 rpm
Read More ...
TIMKEN 3MMV9300HXVVDULFS934

Characteristic rolling element frequency, BSF-12.74 Hz Characteristic outer ring frequency, BPF0-15.26 Hz Characteristic inner ring frequency, BPFI-132 mm da min-130 mm da max-157 mm
Read More ...
TIMKEN 3MM9100WI QUM

dc min-352 mm Da max-100 mm ra max-486 mm d-116 mm D-8 mm
Read More ...
TIMKEN 2MM9300WI TUH

Max operating temperature, Tmax-0.6 Characteristic cage frequency, FTF-8 mm Characteristic rolling element frequency, BSF-3.18 mm Characteristic outer ring frequency, BPF0-11.2 kN Characteristic inner ring frequency, BPFI--20 °C
Read More ...
TIMKEN 3MM9100WI SUL

Static load, C0-54 mm Fatigue limit load, Cu-91 mm Nref-1.5 mm Nlim-45 mm Min operating temperature, Tmin-100 mm
Read More ...

Related News

NSK Internal clearance's introduction

NSK Internal clearance is one of the most important factors affecting bearing performance. The bearing “internal clearance” is the relative movement of the outer and inner rings when they are lightly pushed in opposite directions....

Analysis of NSK new rolling bearing in Japan

NSK new rolling bearing having a "TL" Characteristics of roller bearings "TL" refers to the original properties of steel for special treatment, so as to obtain dimensional stability at high temperature and a raceway surface...

What is NSK Ball Bearing Units ?

The NSK bearing unit is a combination of a radial ball bearing, seal, and a housing of high-grade cast iron or pressed steel, which comes in various shapes.NSK Ball bearing units consist of a precision wide inner ring bearing assembled into a housing...