Product Details

Category:Miniature Precision Ball Bearings	BDI Inventory:0.0
Manufacturer Name:TIMKEN	Minimum Buy Quantity:N/A
Weight / Kilogram:0.036	EAN:0087796241596
Product Group - BDI:B04270	Enclosure:2 Seals
Precision Class:ABEC 7 \| ISO P4

Product Description

Category	2,100 rpm
BDI Inventory	-40 °C
Manufacturer Name	120 °C
Minimum Buy Quantity	0.46 Hz
Weight / Kilogram	12.73 Hz
EAN	14.84 Hz
Product Group - BDI	17.16 Hz
Enclosure	3.5 mm
Precision Class	133 mm

NACHI 5213-2NS

Weight-7.47 Hz Recommended tightening torque for set screw-9.14 Hz B-11.86 Hz B1-131 mm B2-189 mm
Read More ...
TIMKEN 2MMVC9300HXVVDULFS934

Y0-3.77 Hz Mass-6.23 Hz ISO 355 reference-26.5 mm Brand-27 mm Dynamic load, C-30 mm
Read More ...
FAG BEARING 7216-B-TVP-UA

a-0.4 Hz Contact angle α-4.87 Hz rs min-4.84 Hz r1s min-7.16 Hz f0-26.5 mm
Read More ...
SKF 7000 ACD/P4ADGA

Rating life coefficient, A2-194 kN Static load, C0-1.4 Fatigue limit load, Cu-262 kN Nref-31.9 kN Nlim-3,800 rpm
Read More ...
NTN 7000CDB+10D2CS02P5

r-8.68 Hz S-11.32 Hz SW-35 mm C0-35.5 mm T min.-49.5 mm
Read More ...
TIMKEN 2MMV9300HXVVSULFS637

Characteristic rolling element frequency, BSF-4,700 rpm Characteristic outer ring frequency, BPF0--40 °C Characteristic inner ring frequency, BPFI-120 °C ra max-0.44 Hz r1a max-8.12 Hz
Read More ...
TIMKEN 2MM200WI DUL

Characteristic rolling element frequency, BSF-115.7 mm Characteristic outer ring frequency, BPF0-110.8 mm Characteristic inner ring frequency, BPFI-129.2 mm da min-136.61 mm da max-40 mm
Read More ...
TIMKEN 3MM9100WI SUH

Characteristic outer ring frequency, BPF0-8.58 Hz Characteristic inner ring frequency, BPFI-11.42 Hz da min-81 mm Da max-80 mm Db min-110 mm
Read More ...
TIMKEN 2MMV9100HXVVDULFS934

Static load, C0--40 °C Fatigue limit load, Cu-120 °C Nlim (oil)-0.46 Hz Nlim (grease)-13.12 Hz Min operating temperature, Tmin-16.68 Hz
Read More ...
TIMKEN 2MMC9100WI TUM

r1s min-0.43 Hz Radial clearance class-6.91 Hz Mass (without HJ ring)-8.23 Hz Brand-10.77 Hz Dynamic load, C-3.5 mm
Read More ...

Related News

NSK Internal clearance's introduction

NSK Internal clearance is one of the most important factors affecting bearing performance. The bearing “internal clearance” is the relative movement of the outer and inner rings when they are lightly pushed in opposite directions....

Analysis of NSK new rolling bearing in Japan

NSK new rolling bearing having a "TL" Characteristics of roller bearings "TL" refers to the original properties of steel for special treatment, so as to obtain dimensional stability at high temperature and a raceway surface...

What is NSK Ball Bearing Units ?

The NSK bearing unit is a combination of a radial ball bearing, seal, and a housing of high-grade cast iron or pressed steel, which comes in various shapes.NSK Ball bearing units consist of a precision wide inner ring bearing assembled into a housing...