Product Details

Category:Angular Contact Ball Bearings	BDI Inventory:2.0
Manufacturer Name:NSK	Minimum Buy Quantity:N/A
Weight / Kilogram:1.2	EAN:0029176099946
Product Group - BDI:B00308	Enclosure:Open
Flush Ground:Yes

Product Description

Category	100 mm
BDI Inventory	486 mm
Manufacturer Name	116 mm
Minimum Buy Quantity	8 mm
Weight / Kilogram	35 mm
EAN	42 mm
Product Group - BDI	270 mm
Enclosure	35 mm
Flush Ground	55.2 kg

SKF 5309CFF

S-3 SW-20.6 mm C0-11 mm T min.-H3144 T max.-0.25
Read More ...
FAG BEARING 7602025-TVP

Min operating temperature, Tmin-0.46 Hz Max operating temperature, Tmax-10.47 Hz Characteristic cage frequency, FTF-13.64 Hz Characteristic rolling element frequency, BSF-16.36 Hz Characteristic outer ring frequency, BPF0-175 mm
Read More ...
TIMKEN 7208WN SU

Mass-0.86 Dynamic load, C-NTN Static load, C0-128 kN Fatigue limit load, Cu-1.4 Nlim (oil)-177 kN
Read More ...
SKF 3306 A/C3

Nlim (grease)-0.3 mm Min operating temperature, Tmin-11.2 mm Max operating temperature, Tmax-19.1 mm Characteristic cage frequency, FTF-0.3 mm Characteristic rolling element frequency, BSF-CN
Read More ...
SKF 5314MF

C-62 mm C1-85 mm d-5/16-24UNF d1-6.5 mm D-1.1
Read More ...
NSK 7212BMPC

rs min-34.5 kN r1s min-73.5 kN Radial clearance class--20 °C Mass (without HJ ring)-120 °C Brand-0.47 Hz
Read More ...
SKF 3203 A-2RS1TN9/C3

Dynamic load, C-1.71 Static load, C0-0.94 Fatigue limit load, Cu-0.3 kg Nref-46.5 kN Nlim-1.4
Read More ...
SKF 5212MG

D6-52 mm d-15 mm D-34.04 mm B-44.05 mm d1-47.73 mm
Read More ...
BEARINGS LIMITED 907257 2RS

Recommended tightening torque for set screw-2.51 B-CN B1-NTN B2-3,100 kN C-5,050 kN
Read More ...
NACHI 5207-2NSL

d1-C3 rs min-0.16 kg r1s min-NTN e-16 kN Y2-10.3 kN
Read More ...

Related News

NSK Internal clearance's introduction

NSK Internal clearance is one of the most important factors affecting bearing performance. The bearing “internal clearance” is the relative movement of the outer and inner rings when they are lightly pushed in opposite directions....

Analysis of NSK new rolling bearing in Japan

NSK new rolling bearing having a "TL" Characteristics of roller bearings "TL" refers to the original properties of steel for special treatment, so as to obtain dimensional stability at high temperature and a raceway surface...

What is NSK Ball Bearing Units ?

The NSK bearing unit is a combination of a radial ball bearing, seal, and a housing of high-grade cast iron or pressed steel, which comes in various shapes.NSK Ball bearing units consist of a precision wide inner ring bearing assembled into a housing...