Product Details

Category:Angular Contact Ball Bearings	BDI Inventory:12.0
Manufacturer Name:NTN	Minimum Buy Quantity:N/A
Weight / Kilogram:0.18	EAN:4547359509892
Product Group - BDI:B00152	Enclosure:2 Seals
Flush Ground:No

Product Description

Category	T2DB020
BDI Inventory	SNR
Manufacturer Name	29.6 kN
Minimum Buy Quantity	1
Weight / Kilogram	30.6 kN
EAN	3.75 kN
Product Group - BDI	10,000 rpm
Enclosure	17,000 rpm
Flush Ground	-40 °C

NSK 7224BMG

F-11.9 kN d1-6,400 rpm rs min-4,800 rpm r1s min--40 °C Radial clearance class-120 °C
Read More ...
NTN 3205A

ra max-34 mm d-17 mm D-43.5 mm B-15 mm d2-32.4 mm
Read More ...
NACHI 5213-2NS

Y0-3.3 mm Mass-127 mm ISO 355 reference-49.43 mm Dynamic load, C-180 mm Rating life coefficient, A2-0.74
Read More ...
NACHI 5310ZZ

Mass-0.23 Brand-2.95 Dynamic load, C-4.39 Static load, C0-2.89 Fatigue limit load, Cu-C4
Read More ...
FAG BEARING 3309-BD-2Z-TVH

Mass-0.09 kg ISO 355 reference-11.2 kN Brand-7.35 kN Dynamic load, C-0.33 kN Rating life coefficient, A2-15.2
Read More ...
SKF 5204C

D1-M12x1,25 rs min-12 mm r1s min-2 Radial clearance class-33.3 mm Mass (without HJ ring)-6 mm
Read More ...
SKF 5208CZZ

Characteristic inner ring frequency, BPFI-0.99 da min-7.06 kg da max-NTN Da max-445 kN ra max-1
Read More ...
KOYO 5308CD3

r-7.78 Hz S-10.22 Hz SW-3.5 mm C0-64 mm T min.-0.55
Read More ...
TIMKEN 7205WN

r1s min-10.81 Hz Radial clearance class-3.5 mm Mass (without HJ ring)-3.3 mm Dynamic load, C-88.9 mm Static load, C0-48.26 mm
Read More ...
FAG BEARING QJ218-N2-MPA

rs min-71 mm Radial clearance class-75 mm Mass-86 mm Brand-119 mm Dynamic load, C-2 mm
Read More ...
TIMKEN 7222WN MBR

ra max-181 kN r1a max-22.1 kN d-5,600 rpm D-4,800 rpm B--20 °C
Read More ...
SKF 3310 ANR/C3

b max-3.3 mm r0 max-127 mm D4 max-49.43 mm f-180 mm Snap ring reference-0.74
Read More ...
FAG BEARING 3308-BD-2Z

T min.-107.9 mm T max.-156.7 mm Weight-3 mm Recommended tightening torque for set screw-3 Designation of housing-11 mm
Read More ...

Related News

NSK Internal clearance's introduction

NSK Internal clearance is one of the most important factors affecting bearing performance. The bearing “internal clearance” is the relative movement of the outer and inner rings when they are lightly pushed in opposite directions....

Analysis of NSK new rolling bearing in Japan

NSK new rolling bearing having a "TL" Characteristics of roller bearings "TL" refers to the original properties of steel for special treatment, so as to obtain dimensional stability at high temperature and a raceway surface...

What is NSK Ball Bearing Units ?

The NSK bearing unit is a combination of a radial ball bearing, seal, and a housing of high-grade cast iron or pressed steel, which comes in various shapes.NSK Ball bearing units consist of a precision wide inner ring bearing assembled into a housing...