Product Details

Category:Angular Contact Ball Bearings	BDI Inventory:15.0
Manufacturer Name:KOYO	Minimum Buy Quantity:N/A
Weight / Kilogram:1.328	EAN:0605790095252
Product Group - BDI:B00152	Enclosure:Open
Flush Ground:Yes

Product Description

Category	31.75 mm
BDI Inventory	19.58 mm
Manufacturer Name	51 mm
Minimum Buy Quantity	0.38
Weight / Kilogram	1.57
EAN	0.86
Product Group - BDI	NTN
Enclosure	48.5 kN
Flush Ground	1.4

TIMKEN 5201KDD

D-9,000 rpm B-7,600 rpm rs min--20 °C Radial clearance class-120 °C Mass-0.42 Hz
Read More ...
BEARINGS LIMITED 5200 ZZ/C3 PRX

B-1.35 mm d1-1.65 mm e-0.4 mm Y2-34.7 mm Y0-1.12 mm
Read More ...
SKF 8222

Mass-0.6 mm Dynamic load, C-0.5 mm Rating life coefficient, A2-53.5 mm Static load, C0-25 mm Fatigue limit load, Cu-47 mm
Read More ...
SKF 5205C

T min.-4.76 mm T max.-32.8 kN Weight--20 °C Recommended tightening torque for set screw-200 °C Designation of housing-1.67 kg
Read More ...
FAG BEARING 3208-BD-2HRS

Mass-9.8 mm Brand-1.1 Dynamic load, C-14.9 mm Rating life coefficient, A2-4.76 mm Static load, C0-32.8 kN
Read More ...
NSK 7214BMPC

B-0.36 d1-1.67 e-0.92 Y2-NTN Y0-226 kN
Read More ...
SKF 5307M

Number of lubrication holes-57 mm b-20 mm k-105 mm e-225 mm Y1-M18x1,5
Read More ...
NSK 5215JC3

Min operating temperature, Tmin-24.6 mm Max operating temperature, Tmax-19 mm Characteristic cage frequency, FTF-57.7 mm Characteristic rolling element frequency, BSF-31.85 kN Characteristic outer ring frequency, BPF0-20.8 kN
Read More ...
SKF 3207 A-2RS1/C3

Characteristic inner ring frequency, BPFI-10.81 Hz da min-3 mm Da max-2.5 mm ra max-140 mm d-31.5 mm
Read More ...
SKF 5306C

Nlim (grease)-1.4 Min operating temperature, Tmin-189 kN Max operating temperature, Tmax-22.4 kN Characteristic cage frequency, FTF-3,500 rpm Characteristic rolling element frequency, BSF-2,600 rpm
Read More ...
SKF 5307CZZ

Lubrication hole on outer ring-17.38 mm k-58.5 mm Radial clearance class-0.49 Precision class-1.23 Mass-0.68
Read More ...

Related News

NSK Internal clearance's introduction

NSK Internal clearance is one of the most important factors affecting bearing performance. The bearing “internal clearance” is the relative movement of the outer and inner rings when they are lightly pushed in opposite directions....

Analysis of NSK new rolling bearing in Japan

NSK new rolling bearing having a "TL" Characteristics of roller bearings "TL" refers to the original properties of steel for special treatment, so as to obtain dimensional stability at high temperature and a raceway surface...

What is NSK Ball Bearing Units ?

The NSK bearing unit is a combination of a radial ball bearing, seal, and a housing of high-grade cast iron or pressed steel, which comes in various shapes.NSK Ball bearing units consist of a precision wide inner ring bearing assembled into a housing...