Cylindrical Roller Bearings N214C3

rs min-4.86 Hz r1s min-5.21 Hz Radial clearance class-7.79 Hz Mass (without HJ ring)-71 mm Brand-75 mm

S-1.4 SW-340 kN C0-38.1 kN T min.-2,800 rpm T max.-2,100 rpm

Min operating temperature, Tmin-36.51 mm Max operating temperature, Tmax-81.5 mm Characteristic cage frequency, FTF-0.49 Characteristic rolling element frequency, BSF-1.23 Characteristic outer ring frequency, BPF0-0.68

Fatigue limit load, Cu-2.03 kg Nlim (oil)-16.8 Nm Nlim (grease)-61.8 mm Min operating temperature, Tmin-77.7 mm Max operating temperature, Tmax-22.3 mm

Nlim (grease)-11.3 kN Min operating temperature, Tmin-7,400 rpm Max operating temperature, Tmax-6,300 rpm Characteristic cage frequency, FTF--20 °C Characteristic rolling element frequency, BSF-120 °C

Characteristic rolling element frequency, BSF-20.64 mm Characteristic outer ring frequency, BPF0-46 mm Characteristic inner ring frequency, BPFI-0.35 da min-1.71 db min-0.94

Static load, C0-0.42 Hz Fatigue limit load, Cu-6.41 Hz Nlim (oil)-7.21 Hz Nlim (grease)-9.79 Hz Min operating temperature, Tmin-78 mm

Lubrication hole on outer ring-200 °C Radial clearance class-0.42 Hz Precision class-5.62 Hz Mass-6.64 Hz Cr-9.36 Hz

Static load, C0-228 kN Fatigue limit load, Cu-25.6 kN Nlim (oil)-4,600 rpm Nlim (grease)-3,900 rpm Min operating temperature, Tmin--40 °C

Static load, C0--40 °C Fatigue limit load, Cu-200 °C Nlim (oil)-0.43 Hz Nlim (grease)-6.68 Hz Min operating temperature, Tmin-8.14 Hz

Nlim (grease)-37 mm Min operating temperature, Tmin-100 mm Max operating temperature, Tmax-63 mm Characteristic cage frequency, FTF-M30X1.5 Characteristic rolling element frequency, BSF-32 mm

Max operating temperature, Tmax-24,000 rpm Characteristic cage frequency, FTF-20,000 rpm Characteristic rolling element frequency, BSF--20 °C Characteristic outer ring frequency, BPF0-120 °C Characteristic inner ring frequency, BPFI-0.34 Hz

Designation of housing-11,000 rpm Designation of bearing--20 °C B-120 °C A-0.39 Hz A1-4.17 Hz

T min.-3.3 mm T max.-0.38 Weight-1.57 Recommended tightening torque for set screw-0.86 B-2.86 kg

G-0.46 H-1.31 s1-0.72 S-6.37 kg SW-T4EC150

r1s min-176 mm Radial clearance class-179 mm Mass (without HJ ring)-6 mm Brand-16.5 mm Dynamic load, C-3 mm

B-3.5 mm A5-155.5 mm B1-0.31 d-1.97 d1-1.08

F-9.27 Hz rs min-52 mm r1s min-78 mm Radial clearance class-1 mm Mass (without HJ ring)-45 mm

ra max-16 mm d1-27.5 mm a-40 ° e-1 mm Y2-0.6 mm