Product Details

Enclosure:Open	Bore Type:Cylindrical Bore
Configuration:Single Row	Weight:0.470 kg
Bore Size:50 mm	Outside Diameter:90 mm
Width:20 mm	Outside Ring Inside Diameter:80.4 mm
Fillet Radius/Chamfer:1.1 mm	r1:1.1 mm

Product Description

Enclosure	NTN
Bore Type	91.5 kN
Configuration	1.9
Weight	140 kN
Bore Size	17.1 kN
Outside Diameter	4,300 rpm
Width	3,200 rpm
Outside Ring Inside Diameter	-40 °C
Fillet Radius/Chamfer	120 °C
r1	0.45 Hz

NACHI N405C3

Recommended tightening torque for set screw-15.8 Hz Designation of housing-3.5 mm Designation of bearing-3.3 mm Designation of closed end cover-161.92 mm Designation of open end cover-38.1 mm
Read More ...
NACHI N330C3

Da max-4.38 Hz ra max-16 mm d-17 mm D-28 mm B-0.6 mm
Read More ...
NACHI N405

C1-76 mm d-30 mm d1-3 mm D-25.4 mm G-0.1 kg
Read More ...
NACHI N212C3

d-5.6 Hz D-8.4 Hz B-104 mm E-176 mm F-2.5 mm
Read More ...
NACHI N207C3

db min-26.5 mm Da max-27 mm Db max-33 mm r1a max-45.5 mm ra max-1 mm
Read More ...
NACHI N1011C3

B-13 mm C-1 mm C1-C3 d-0.08 kg D-NTN
Read More ...
NACHI N218C3

r1a max-82.5 kN D-93 kN C-11.3 kN Brand-7,400 rpm Min operating temperature, Tmin-6,300 rpm
Read More ...
NACHI N203C3

B-CN d-6.48 kg Dz-SNR G-367 kN H-461 kN
Read More ...
NACHI N1032

Da max-6.1 Hz ra max-7.58 Hz d-10.42 Hz D-122 mm B-188 mm
Read More ...
NACHI N338

db min-47 mm Da max-72 mm Db min-1.5 mm Ca min-35 mm Cb min-80 mm
Read More ...
NACHI N1060C3

Radial clearance class--40 °C Mass (without HJ ring)-120 °C Brand-0.42 Hz Dynamic load, C-6.12 Hz Static load, C0-6.76 Hz
Read More ...
NACHI N1092

Min operating temperature, Tmin-4 mm Max operating temperature, Tmax-21.8 mm Characteristic cage frequency, FTF-0.15 kg Characteristic rolling element frequency, BSF-NTN Characteristic outer ring frequency, BPF0-64 kN
Read More ...
NACHI N1022C3

r-M6x1 S-5 mm SW-0.6 C0-7 mm T min.-3 mm
Read More ...

Related News

NSK Internal clearance's introduction

NSK Internal clearance is one of the most important factors affecting bearing performance. The bearing “internal clearance” is the relative movement of the outer and inner rings when they are lightly pushed in opposite directions....

Analysis of NSK new rolling bearing in Japan

NSK new rolling bearing having a "TL" Characteristics of roller bearings "TL" refers to the original properties of steel for special treatment, so as to obtain dimensional stability at high temperature and a raceway surface...

What is NSK Ball Bearing Units ?

The NSK bearing unit is a combination of a radial ball bearing, seal, and a housing of high-grade cast iron or pressed steel, which comes in various shapes.NSK Ball bearing units consist of a precision wide inner ring bearing assembled into a housing...