Product Details

Enclosure:Open	Bore Type:Cylindrical Bore
Configuration:Single Row	Weight:0.130 kg
Bore Size:25 mm	Outside Diameter:52 mm
Width:15 mm	Outside Ring Inside Diameter:45 mm
Fillet Radius/Chamfer:1 mm	r1:0.6 mm

Product Description

Enclosure	19 mm
Bore Type	5 mm
Configuration	31.75 mm
Weight	62 mm
Bore Size	1/4-28UNF
Outside Diameter	5.5 mm
Width	0.6
Outside Ring Inside Diameter	15.9 mm
Fillet Radius/Chamfer	3.18 mm
r1	11.2 kN

NACHI N1008

Characteristic inner ring frequency, BPFI-2,800 rpm da min-2,100 rpm da max--40 °C db min-120 °C Da max-0.46 Hz
Read More ...
NACHI N1028

Fatigue limit load, Cu-1.1 Nlim (oil)-0.6 Nlim (grease)-0.9 kg Min operating temperature, Tmin-NTN Max operating temperature, Tmax-93.5 kN
Read More ...
NACHI N328C3

Min operating temperature, Tmin-2 mm Max operating temperature, Tmax-80 mm Characteristic cage frequency, FTF-170 mm Characteristic rolling element frequency, BSF-39 mm Characteristic outer ring frequency, BPF0-151 mm
Read More ...
NACHI N344C3

Fatigue limit load, Cu-0.08 kg Nlim (oil)-39 kN Nlim (grease)-98 kN Axial displacement K Factor-3,300 rpm Preload level-5,000 rpm
Read More ...
NACHI N215C3

Y0-17 mm Brand-4.3 mm Dynamic load, C-23.81 mm Rating life coefficient, A2-37.4 mm Static load, C0-52 mm
Read More ...
NACHI N430

Cr-2.5 mm C0r-CN Track load capacity spherical outer ring-P0 Nlim (grease)-0.02 kg Min operating temperature, Tmin-NTN
Read More ...
NACHI N314C3

Static load, C0-7 Fatigue limit load, Cu-0.23 kN Nlim (oil)-177 N/µm Nlim (grease)-381 N/µm Min operating temperature, Tmin--30 °C
Read More ...
NACHI N424C3

Rating life coefficient, A2-1.49 Static load, C0-0.82 Fatigue limit load, Cu-0.3 kg Nlim (oil)-51 kN Nlim (grease)-1.4
Read More ...
NACHI N10/500C3

Recommended tightening torque for set screw-22 mm a-42 mm rs min-1 mm r1s min-17 mm e-47 mm
Read More ...
NACHI N408C3

d2-5.42 Hz D1-30 mm rs min-31.8 mm Number of lubrication holes-47 mm b-1 mm
Read More ...
NACHI N1030

C0-23.81 mm T min.-59.5 mm T max.-16.41 mm Recommended tightening torque for set screw-0.32 b-1.88
Read More ...

Related News

NSK Internal clearance's introduction

NSK Internal clearance is one of the most important factors affecting bearing performance. The bearing “internal clearance” is the relative movement of the outer and inner rings when they are lightly pushed in opposite directions....

Analysis of NSK new rolling bearing in Japan

NSK new rolling bearing having a "TL" Characteristics of roller bearings "TL" refers to the original properties of steel for special treatment, so as to obtain dimensional stability at high temperature and a raceway surface...

What is NSK Ball Bearing Units ?

The NSK bearing unit is a combination of a radial ball bearing, seal, and a housing of high-grade cast iron or pressed steel, which comes in various shapes.NSK Ball bearing units consist of a precision wide inner ring bearing assembled into a housing...