Product Details

Bore Type:Cylindrical Bore	Enclosure:Double Seal
Configuration:Single Row	Weight:4.230 kg
Bore Size:85 mm	Outside Diameter:180 mm
Width:41 mm	Fillet Radius/Chamfer:3 mm
Dynamic Load Rating:133,000 N	Static Load Rating:96,500 N

Product Description

Bore Type	3.5 mm
Enclosure	1.5 mm
Configuration	38.1 mm
Weight	16.52 mm
Bore Size	53 mm
Outside Diameter	0.44
Width	1.35
Fillet Radius/Chamfer	0.74
Dynamic Load Rating	NTN
Static Load Rating	43.5 kN

NACHI 6805-2NSE9C3

da max-3,100 rpm Da max--40 °C ra max-120 °C rs min-0.46 Hz Radial clearance class-10.6 Hz
Read More ...
NACHI 6801-2NSE9

Recommended tightening torque for set screw-72 mm B-5 mm C-129 mm C1-2 mm d-65 mm
Read More ...
NACHI 62/32-2NSE9

D-0.6 mm G-CN m-0.21 kg r-SNR S-38.1 kN
Read More ...
NACHI 6802-2NSE9

f0-120 °C Precision class-0.43 Hz Mass-6.67 Hz Brand-7.76 Hz Dynamic load, C-10.24 Hz
Read More ...
NACHI 6903-2NSE9

Characteristic rolling element frequency, BSF-C3 Characteristic outer ring frequency, BPF0-NTN Characteristic inner ring frequency, BPFI-5,700 kN ra max-11,400 kN r1a max-812 kN
Read More ...
NACHI 6908-2NSE9C3

Static load, C0-6.1 kN Fatigue limit load, Cu-2.75 kN Nlim (oil)-0.13 kN Nlim (grease)-12.7 Min operating temperature, Tmin-22,000 rpm
Read More ...
NACHI 62/22-2NSE9

Characteristic inner ring frequency, BPFI-1 mm da max-70 mm db min-50 mm Da min-54.2 mm Da max-1.1 mm
Read More ...
NACHI 6312-2NSEC3

SW-45 kN C0-40 kN T min.-280 kN T max.-235 kN Recommended tightening torque for set screw-140 kN
Read More ...
NACHI 6211-2NSE_1C3

Characteristic rolling element frequency, BSF-97.5 mm Characteristic outer ring frequency, BPF0-73.5 mm Characteristic inner ring frequency, BPFI-78.4 mm ra max-1.5 mm r1a max-1.5 mm
Read More ...
NACHI 6904-2NSE9

Min operating temperature, Tmin-M20 Max operating temperature, Tmax-260 Nm Characteristic cage frequency, FTF-M16 Characteristic rolling element frequency, BSF-M12 Characteristic outer ring frequency, BPF0-85 mm
Read More ...
NACHI 6810-2NSE9C3

rs min-CN r1s min-5.2 kg Radial clearance class-SNR Mass (without HJ ring)-279 kN Brand-312 kN
Read More ...

Related News

NSK Internal clearance's introduction

NSK Internal clearance is one of the most important factors affecting bearing performance. The bearing “internal clearance” is the relative movement of the outer and inner rings when they are lightly pushed in opposite directions....

Analysis of NSK new rolling bearing in Japan

NSK new rolling bearing having a "TL" Characteristics of roller bearings "TL" refers to the original properties of steel for special treatment, so as to obtain dimensional stability at high temperature and a raceway surface...

What is NSK Ball Bearing Units ?

The NSK bearing unit is a combination of a radial ball bearing, seal, and a housing of high-grade cast iron or pressed steel, which comes in various shapes.NSK Ball bearing units consist of a precision wide inner ring bearing assembled into a housing...