Product Details

Bore Type:Cylindrical Bore	Enclosure:Double Seal
Configuration:Single Row	Weight:0.052 kg
Bore Size:50 mm	Outside Diameter:65 mm
Width:7 mm	Fillet Radius/Chamfer:0.3 mm
Dynamic Load Rating:6,400 N	Static Load Rating:5,800 N

Product Description

Bore Type	120 °C
Enclosure	0.4 Hz
Configuration	4.81 Hz
Weight	5.23 Hz
Bore Size	7.77 Hz
Outside Diameter	0.8 mm
Width	1.5 mm
Fillet Radius/Chamfer	38.1 mm
Dynamic Load Rating	69.01 mm
Static Load Rating	19.05 mm

NACHI 6905-2NSE9

Designation of housing--40 °C Designation of bearing-120 °C B-0.44 Hz A-7.44 Hz A1-8.72 Hz
Read More ...
NACHI 6001-2NSE9C3

C0-16.52 mm T min.-11.91 mm T max.-15.88 mm Weight-53 mm Recommended tightening torque for set screw-14.48 mm
Read More ...
NACHI 6220-2NSLC3

rs min-2.5 mm r1s min-160 mm Mass-290 mm Dynamic load, C-80 mm Static load, C0-67 mm
Read More ...
NACHI 6901-2NSE9

Static load, C0-SNR Fatigue limit load, Cu-27.9 kN Nlim (oil)-15.9 kN Nlim (grease)-0.72 kN Min operating temperature, Tmin-13.1
Read More ...
NACHI 6800-2NSE9C3

m-0.16 kg r-3.7 Nm S-27 mm SW-15 mm C0-4.3 mm
Read More ...
NACHI 6804-2NSE9C3

Nlim (oil)-16.37 Hz Nlim (grease)-17 mm Min operating temperature, Tmin-42 mm Max operating temperature, Tmax-47 mm Characteristic cage frequency, FTF-17 mm
Read More ...
NACHI 6802-2NSE9C3

Characteristic inner ring frequency, BPFI-400 mm da min-600 mm Da max-4 mm ra max-420 mm d-700 mm
Read More ...
NACHI 6012-2NSEC3

Static load, C0-244 kN Fatigue limit load, Cu-249 kN Nlim (oil)-30.2 kN Nlim (grease)-4,600 rpm Min operating temperature, Tmin-6,200 rpm
Read More ...
NACHI 6219-2NSLC3

Nlim (grease)-200 °C Min operating temperature, Tmin-0.42 Hz Max operating temperature, Tmax-6.14 Hz Characteristic cage frequency, FTF-6.75 Hz Characteristic rolling element frequency, BSF-9.25 Hz
Read More ...
NACHI 6307-2NSE9C3

Characteristic inner ring frequency, BPFI-8,900 rpm da max-6,700 rpm db min--40 °C Da min-120 °C Da max-0.42 Hz
Read More ...
Timken 100BIC439

Static load, C0-4,000 rpm Fatigue limit load, Cu--40 °C f0-120 °C Nlim (grease)-0.44 Hz Min operating temperature, Tmin-8.08 Hz
Read More ...
NACHI 6313-2NSEC3

d-P4 d1-0.11 kg D-SNR G-16.4 kN m-11.7 kN
Read More ...

Related News

NSK Internal clearance's introduction

NSK Internal clearance is one of the most important factors affecting bearing performance. The bearing “internal clearance” is the relative movement of the outer and inner rings when they are lightly pushed in opposite directions....

Analysis of NSK new rolling bearing in Japan

NSK new rolling bearing having a "TL" Characteristics of roller bearings "TL" refers to the original properties of steel for special treatment, so as to obtain dimensional stability at high temperature and a raceway surface...

What is NSK Ball Bearing Units ?

The NSK bearing unit is a combination of a radial ball bearing, seal, and a housing of high-grade cast iron or pressed steel, which comes in various shapes.NSK Ball bearing units consist of a precision wide inner ring bearing assembled into a housing...